0.00000000000000000000000000000000000000001 mg
The weight of rubber hose varies depending on the density of the rubber material. On average, a 4-inch rubber hose weighs about 0.15-0.2 pounds per foot. So, 100 feet of 4-inch rubber hose would weigh approximately 15-20 pounds.
A 100-foot hose with an inside diameter of five inches can hold 102 US gallons of water.
Around 943 lbs. Water weighs 8.33 lbs/gal. 5 inch hose holds 1 gal per 1 foot of hose. So 8.33x100 foot is 833 lbs. Add that to the 110 lbs that the hose weighs empty and you have 943 lbs
100-155
a healthy weight range is from 100 lbs to 120 lbs
To calculate the volume of water in a 2-inch by 100-foot hose, first convert the diameter to radius in feet: the radius is 1 inch or 1/12 feet. The volume of a cylinder is given by the formula ( V = \pi r^2 h ). Plugging in the values, ( V = \pi (1/12)^2 (100) \approx 2.18 ) cubic feet. Since there are about 7.48 gallons in a cubic foot, this is roughly 16.3 gallons of water.
i'd say 100 pounds
A 5 foot 3 inches male should weight approximately 100-125 pounds.
In one inch there are hundred 100ths of a inch Since there are 12 inches in a foot, there will be 12 x 100 = 1200 hundredths of an inch in a foot
That section of hose holds 25.5 gallons of water when it's full, which weighs about 213 pounds. To that, add the weight of the empty hose, which I don't know.
That's kinda gonna depend on how long the hose is. Without doing any figuresor math at all, we're pretty sure that a one-foot-long piece of 2-1/2" hose willhold more water than a 100-foot-long piece.In fact, when we do some figures, we can tell you that it'll hold one gallon of waterin every 47.1 inch length of hose.
There are 12 inches in one foot. Therefore, one foot is equal to 12 x 100 = 1200 hundredths of an inch.