Drivers side top side on head underneath the airfilter. Hose 4bolts And a electric plug-in
No.
There is no cam sensor on the 1995 year engine. GM. did not use a cam sensor on that year.
The cam sensor seal can cause a leak if not installed correctly.
The temperature sensor on a 2004 Neon 2.0 engine is located on the driver side of the engine below the cam sensor.
2006 was the last Neon. The cam sensor was located on the driver side end of the cylinder head.
on the drivers side of the motor, top, front of cam sensor
It tells the computer the rotational position of the camshaft.
The cam sensor is on the driver side of the cylinder head.
on the driver side of the engine right below the cam sensor on the head.
no cam sensor signal to pcm with crank sensor signal present. check for 5 volt ref and ground at cam sensor connector. scope cam signal. most likely cam sensor defective, hall effect type sensor
No cam, but yes crank
Camshaft position sensor intermittent.The cam sensor on the end of the head has failed.Camshaft position sensor intermittent.The cam sensor on the end of the head has failed.