The switch should be the same as your headlight switch. If not then you will either need to install your own switch for the running lights or buy a new OEM switch module.
It only allows starting in park and neutral, and runs the reverse lights.
http://www.the12volt.com/installbay/stereodetail/1151.html
How do you replace the safety neutral switch on a 1995 Jeep Cherokee 5-speed transmission and Where is the safety neutral switch located?
How to change the brake switch on a 2004 Jeep grand Cherokee Laredo
Why Is the fan is not running fast enough to cool down the motor? On A Jeep grand Cherokee Laredo 202
99 jeep Cherokee Laredo stay running after turn off the ignition switch?
No>
Your Electronic Ignition Switch is bad. It is located on the inside of the jeep under your steering column.
Possible, but doubtfull
there is no button of switch you have to disconnect the negative battery terminal
probably a faulty or mis-aligned brake light switch.
blown fuse blown fuse
turn on the running lights and pull out on the multi switch.
Either the switch is bad or the relay is.
if it is a jeep Cherokee it needs a neutral safety switch mounted on the passenger side of the transmission. if it is a jeep grand Cherokee it needs the backup switch located on the drvers side of the transmission
Most likely no. The only ones with drl, would have been from Canada.
Turn on you lights and put them on low beam. That is daytime running lights.