0
the safe working load is the load the stand can support safely without failure. It Is called safe because it can generally stand up to five times the safe load but one should not intentionally exceed the safe load. Safe load is also called working load or rated load
Wiki User
∙ 6y ago
Add your answer:
Earn +20 pts
What is a gradually applied load?
It is a load applied slowly rather than quickly or suddenly. If applied quickly, the problem becomes one of dynamics, or impulse loading, but if applied slowly (gradual) it is a statics problem
What happens when a load is applied to the beam?
when the load is applied in the beam then deflection takes place. the nature of the deflection depends on the support provided on it
What is the difference between shock load and gradually applied loads and suddenly applied Load?
The only difference between a shock load and a gradually applied load is something called an impulse; defined as the integral of a force with respect to time. When a force is applied to a rigid body it changes the momentum of that body. A small force applied for a long time can produce the same momentum change as a large force applied briefly, because it is the product of the force and the time for which it is applied that is important.
What is a deflection in cantilever beam?
it will depend upon the load and moment applied on the beam.
How do you calculate static load?
A static load is the mechanical force applied to an object as a result of both gravity's push and the weight of the object. It can be calculated by averaging out the two numbers.
What is safe working load to axle stands?
The safe working load for axle stands can vary depending on the model and manufacturer. However, as a general guideline, most axle stands have a safe working load of around 2-6 tons per pair. It is important to always check the manufacturer's specifications and never exceed the recommended weight limit to prevent accidents or damage.
What is swl?
The SWL stands for - Safe Working Load
How do you calculate safe working load of a bollard?
To calculate the safe working load of a ship's bollard, you need the working stress and the force applied. These two will help you compute the safe working load.
What is the mechanical advantage of a wheel and axle mechanism in which the radius of the axle supporting the load is 6 inches and the diameter of the drum to which the force is applied is 24 inches?
4
what are disadvantages of wheel and axle?
Your load could slow down depending on how much force applied.
Is a wheel barrow an example of a lever?
Yes, the axle is the Fulcrum point. The handles are the point of applied force. The bin holds the load.
What is applied load?
defination of suddenly applied load
What is the meaning of no load and full load on a power supply?
NO LOAD:--- as it is very clear from the word itself that it is no load that means no load has been applied to the machine..i.e.the output terminal of machine is open circuited FULL LOAD:-- the maximum load value that can be applied to the machine at which it can work without damaging any part of the machine is called machine working at full load.
What is factored load and Service load?
Basically, service loads are those applied loads which have not yet been factored. Also known as "working loads"
What is the suddenly applied load?
defination of suddenly applied load
What is suddenly applied load?
defination of suddenly applied load
What does s.w.l mean on vehicle hoist?
S.W.L on a vehicle workshop hoist stands for Safe Working Load
