It is a load applied slowly rather than quickly or suddenly. If applied quickly, the problem becomes one of dynamics, or impulse loading, but if applied slowly (gradual) it is a statics problem
The only difference between a shock load and a gradually applied load is something called an impulse; defined as the integral of a force with respect to time. When a force is applied to a rigid body it changes the momentum of that body. A small force applied for a long time can produce the same momentum change as a large force applied briefly, because it is the product of the force and the time for which it is applied that is important.
when the load is applied in the beam then deflection takes place. the nature of the deflection depends on the support provided on it
it will depend upon the load and moment applied on the beam.
the safe working load is the load the stand can support safely without failure. It Is called safe because it can generally stand up to five times the safe load but one should not intentionally exceed the safe load. Safe load is also called working load or rated load
A static load is the mechanical force applied to an object as a result of both gravity's push and the weight of the object. It can be calculated by averaging out the two numbers.
The maximum stress induced in a body due to suddenly applied load is twice the stress induced when the same load is applied gradually
Stress suddenly applied load = 2 x stress gradually applied
halfed
The only difference between a shock load and a gradually applied load is something called an impulse; defined as the integral of a force with respect to time. When a force is applied to a rigid body it changes the momentum of that body. A small force applied for a long time can produce the same momentum change as a large force applied briefly, because it is the product of the force and the time for which it is applied that is important.
defination of suddenly applied load
defination of suddenly applied load
defination of suddenly applied load
The applied load refers to the load which acts on a structure at a given location or series of locations. The reaction is that which balances the applied load at the specific boundary (reaction) loactions. The sum of the applied load is equal to the reactions in the axis of application. For equilibrium, the sum of all forces and monemts are zero, so reactions may contain moment terrms under applied load, even if the applied laod has no applied moment.
The load conductor is connected to the load side of the generator breaker. Once the generator is up to speed the load breaker is closed and the voltage is then applied to the load.
stress is defined as the ratio of applied load and area. stress=applied load/area.
Axial load (or thrust load) is a force applied parallel to the longitudinal axis, whereas, a radial load is a force applied transverse to this longitudinal axis.
it is the ratio of buckling load to applied load