The load conductor is connected to the load side of the generator breaker. Once the generator is up to speed the load breaker is closed and the voltage is then applied to the load.
NO, generator always generating AC current,when commutator is used,at that time AC is converted in DC.and due to this generator is called dc generator.
Turn the DC generator inside out and you have an alternator .
it is the ratio of buckling load to applied load
A: a transformer will follow the rule of input output ratio with no load. As soon as a load is applied there will be changes in the ratio
It's speed and the number of poles.
The reason an AC voltage applied across a load resistance produces alternating current is because when you have AC voltage you have to have AC current. If DC voltage is applied, DC current is produced.
hyhjyjyjy
A generator, rated at 16 MW, should be able to continuously supply a load of 16 MW. You don't need to compute its 'minimum load', because the minimum load will be zero watts! In other words, you can run the generator with no load whatsoever if you wish to waste fuel.The point is that the power supplied by a generator is determined by the load, NOT by the generator itself -so it is important that the generator is capable of supplying the maximum load applied to it. A generator's 'rated power output' simply tells us the maximum load it is capable of supplying.
The fuel usage will be based on the load applied to the generator and how many KW the generator outputs. The more load the higher the fuel consumption. You do not list the output of the generator nor the load so all I do is point you to the diesel fuel generator consumption chart. Click the link to see the chart where you can figure it yourself.
what is the construction of ac generator
If the commutator is removed from your generator, you (if you connect slip rings) get AC supply instead of DC supply. the function of the commutator is to convert AC to DC supply and vice versa.Additional AnswerRemoving the commutator will also prevent you from connecting the output of the generator to its load. Remember, the generator's armature is spinning!
An ac generator produces ac, a dc generator produces dc, it all depends on the generator.
Heat load is calculated by the following equation Q=m*cp*deltaT m=mass flow rate cp=specific heat deltaT=difference in temperature
Alternator and ac generator is equal
The generator's voltage regulator will sense the fluctuation. If the voltage goes low more current will be applied to the armature to compensate. If the voltage goes high less current will be applied to the armature to compensate.
NO, generator always generating AC current,when commutator is used,at that time AC is converted in DC.and due to this generator is called dc generator.
DC generator