It's speed and the number of poles.
The higher the frequency the higher the RPM the motor will turn
Generator output is controlled by voltage feedback to the voltage regulator which senses voltage drop or rise and regulates the current being sent to the armature. This rise and fall of the armature current governs the generators output voltage.
NO, generator always generating AC current,when commutator is used,at that time AC is converted in DC.and due to this generator is called dc generator.
Look on the AC power adapter and read its rating in watts. You will need an inverter with at least that output capacity.
Turn the DC generator inside out and you have an alternator .
You step down voltage from an AC generator with a transformer.You step down frequency from an AC generator with a motor/generator set, or with an inverter. This is not a common thing to do.
A battery by itself will only supply DC output. You would need a method to convert DC to AC, such as an inverter, in simplified terms: an electronic circuit which has an oscillator to create the desired frequency then amplifies it to the desired magnitude output. Another way, which I don't know if used anymore, is a motor-generator set. A DC motor's shaft is connected to an AC generator's shaft, and the output is taken from the AC generator.
Depending on the type of generator, you can measure the voltage at the output. Assuming it's a regular 120 volt AC generator, the output should measure 120V AC. If it doesn't, you may have problems.
You change the speed of rotation.
A natural gas generator connected to the grid has its voltage and speed (frequency) stabilised by being connected to the grid. All generators on a grid run synchronously, and it happens because if one generator has a tendency to lag behind it will produce less power and thereby maintain its speed.
field strength
dc
There would be a significant decrease in the output of the generator. Depending on the type of generator, it could stop working altogether.
There would be a significant decrease in the output of the generator. Depending on the type of generator, it could stop working altogether.
AC generators have a varying waveform which is sinusoidal in nature, whereas a DC output is linear.
It may not be possible to physically convert AC generator to DC generator. What can be done is that 'Rectifier' of suitable capacity can be connected to the out put of AC generator to get DC supply.
hyhjyjyjy