Most Chevy 350 4 bolt engines will bolt into a 1979 Corvette.
Driver side rear between firewall and engine block. It is bolted in with one of the engine and trans bolt. You will have to remove the wiper motor to get to it.
Some Pontiacs came from the factory with Chevy engines. If this is the case on your 79 firebird, then the transmission will bolt up to a 350 Chevy. If the car came with a Pontiac engine, then the bolt pattern is different and would not bolt up.
sure.
Yes, the mounting position is the same, but the actual mounts are different. Bolt the mounts from your 1975 corvette to your 1996 LT1 engine and it should go right in. The transmission should also bolt right up to your 1996 LT1 engine.
If you have a V8 in you Monte now the corvette engine should bolt right in but you will have to change the wiring and computer.
you take the bolts out put new one on connect line bolt in place sincerely mtchell
The 1998 Chevy Corvette parking brake can be adjusted with the parking brake adjustment bolt. You can also adjust the parking brake cable.
Yes
what is the bolt pattern for 1963 corvette
YES.
No
Yes, they all use the same seat rails. They should bolt right in.