answersLogoWhite

0

Overboots, protective mask and gloves

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Identify three items you must wear in mopp 1?

protective overgarments protective mask protective overboots


Identify three items you must carry in MOPP 1?

protective gloves protective mask footwear covers


At what point should mopp 2 be implemented as well as mopp 1?

When Alarm Yellow is declared.


What action should implemented mopp 2 in addition to the actions required for mopp 1?

don your protective overboots


What are ccor guidelines?

mopp level 1


What is the first MOPP level in which you will don protective gloves?

MOPP 4 MOPP level 4 is when the gloves are donned. * At MOPP 0 no gear is worn, but soldiers are at a heightened state and gear is immediately available. * At MOPP 1 the gas mask and hood are donned. * At MOPP 2 overboots are worn. * At MOPP 3 the CPE suit is worn. * At MOPP 4 the gloves are put on; however, unit commanders are given flexibility to adjust the protocols to meet the mission objectives.


What action should be implemented during mopp 2 in addition to the actions required for mopp 1?

don your protective overboots Don your protective overboots.don your protective overboots


Place the steps for entering a contaminated area in the correct order assume you are in mopp 2 and the zone you are entering is a mopp 4?

1- Replace or refill your individual canteens. 2- Assume MOPP 4 3- Check your supply of decontamination kits, antidotes, and detection paper


When should MOPP 1 be implemented?

when attacks could occur with little or no warning


How long do you have to get in full mopp 4 -?

MOPP stands for Mission Oriented Protective Posture and describes an individual's chemical protective clothing.There are six levels of MOPP:MOPP Ready - Mask carried, first set of protective clothing, overboots and gloves within 2 hours and another within 6 hours.MOPP 0 - Mask carried, first set of clothing, boots and gloves carried, within arm's reach or within 5 minutes.MOPP 1 - Clothing worn; mask, overboots and gloves carried.MOPP 2 - Clothing and overboots worn; mask and gloves carried.MOPP 3 - Clothing, overboots and mask worn; gloves carried.MOPP 4 - Clothing, overboots, mask and gloves worn.Mask Only - Only mask is worn. This is used when riot control agents rather than chemical warfare agents are in use or when in the downwind vapor hazard area of a non-persistent agent other than blister or nerve chemical warfare agents.It should take no longer than eight minutes to go from MOPP 0 to MOPP 4 (assuming MOPP 0 with gear carried or within arm's reach). This varies by situation; it's a lot more time consuming if you have to go to MOPP 4 while hunched over under a poncho due to aerial spray hazard.With practice, it's not uncommon to cut down to 2-3 minutes to full encapsulation.


When must you placard for table 1 items?

Always, with few exceptions


Action should implemented during mopp2 in addiotion to the actions required for mopp 1?

don your protective overboots