H23
=Honda 23.. engine model
sulfur reacts to group 1 metal nitrides to form flammable mixtures,involving flammable and toxic nh3 and h23 glasses if water is present.
No, dependent means to rely on or be influenced by something else. It does not mean to replace.
92.5 percent pure silver. MO stands for Modena Italy
If the chlorine test turns orange, it may indicate a low chlorine level in the water. This could mean that the water is not well sanitized and may not be safe for swimming or other uses that require proper disinfection. It's important to address this issue by adding more chlorine to bring the levels up to the appropriate range.
A composed mean is a statistical method that combines the means of subgroups to obtain an overall mean for a larger group. This technique is often used when data is collected from multiple subgroups and an overall average is needed.
yes because you can swap a h23 transmission onto an h22 engine
H 22 and h23
Yes
Non vtec 160 vtec sir 216
it depends on the model, if its just the s model it has a H22, a 2.2l SOHC, but the si model has the H23, the 2.3l DOHC, however the h22 is vtec while the h23 isnt, if you are looking at a stock lude anyways.
5.89 = 5 and 89 over 100. Hope I helped! ~ WonX ~
There are two types of H23... the h23a is the jdm model of the non-vtec h23, there is also the usdm version also known as the h23a1... anything with digit on engine code is usdm... But it would be absolete to only mention those two. In Japan there is also a h23a which can be known as "blue top" or H23 vtec. Came from the SiR accord in japan.
Fuel relay under the dash.
It is located on the top radiator line where it connects to the block. There should be 2 bolts that secure it to the block.
1-3-4-2 distributor rotor turns clockwise cylinder layout: 4 3 2 1 front of car
Yes, it will fit with some minor modification. Other popular swaps are the h22a1, h22a4, h22a and h23.
i assume you question is can u have a vtec engine with out changing the original engine... simple. the answer is no... u want vtec, you have to get the whole engine. other wise you can modify you standard one with cams, pod, headers puter etc etc... good luck yes you can make a h23 prelude a vtec you just need the h22 heads along with ecu cause h23 ecu dosent support vtec, also theres a plug you got to pop out on the top of the h23 block.easier yet just put the h22 in the car. you really wont gain that much more from a 2.3 displacement only about 15 torqe and 10 hp give or take