Into units of what?
1.8 kilowatts = 2.4 hp <<>> The conversion is 746 watts are equal to 1 horsepower. To change 1.8 kilowatts to watts is 1.8 x 1000 = 1800 watts. Therefore 1800/746 = 2.4 horsepower. This is how the answer above was obtianed.
hp or power is torque/time (rotating motor) 3000# can be lifted 10' in a minute with 1Hp 30,000# can be lifted 1' in a minute with 1Hp 1000 tons can be lifted 1' in an hour with 1 hp
the best pump is a sta-rite dura glas .. a 1hp is what i would use
For 1 hp motor, a single phase starter is used. Because a single phase starter gives economy consumption,easy trouble shooting and easy installation when compared to three phase starters and supply....
maximum current of a 1hp
my due date is jan 31 but i dont know my lpm date according to due date can we figure out my lpm date
66 minutes
1hp = 0.7457 kW 1hp = 745.7 W 1W = 1.341 hp you can use these conversion factors
Use a full restore at 1hp.
Into units of what?
The airport code for Malekoula Airport is LPM.
Each litre is equivelant to approximately 3%. 35% Oxygen is about 5 litresThis math here is only correct if you are using a nasal cannula to deliver the oxygen. Respiratory therapy only uses this as an estimate since the cannula isn't the most effective oxygen delivery system but is the most comfortable for a patient.21% Fio2 is room Air, that is we breath in normally, for anyone without any supplemental Oxygen.The first 1 liter is 3%Fio2, which is 21% +3% =24%Fio2, thereafter it is 4% to each liter flow of oxygenFirst liter of Oxygen which is 1Lpm =3% + 21%(Room Air) Total = 24% Fio2 Add 4% for each liter flow there 2Lpm= 28% Fio23Lpm= 32% Fio2Save4Lpm= 36% Fio25Lpm= 40% Fio26Lpm= 44% Fio2For a Venturi Mask which is more effective especially for patients with COPD the Fio2 settings are as follows:White cap:35% FiO2 set lpm at 940% FiO2 set lpm at 1250% FiO2 set lpm at 15Green cap:24% FiO2 set lpm at 3lpm26% FiO2 set lpm at 3lpm28% FiO2 set lpm at 6lpm30% FiO2 set lpm at 6 lpm
1hp=746watts
1hp=745 watt
1hp = 15-17cc
False swipe