For a 1hp 3-phase motor, the current draw will depend on the voltage supply. Typically, at 230V, a 1hp 3-phase motor will draw around 3.6 amps. However, this value may vary based on the motor efficiency and power factor.
50 kVA is 16.667 kVA per phase and you divide that by the phase voltage. Current = 16667 / 277 = 60 Amps
Pls.answer me of above question
To convert from kilowatts (kW) to amps in a 3-phase system, we need to know the system voltage. Using the formula: Amps = (kW x 1000) / (√3 x Volts), where √3 is the square root of 3. Assuming a system voltage of 120/208V, the amperage would be approximately 135.1 amps.
To calculate the amperage for a 10kW heater on a 3-phase 220V system, use the formula: Amps = (kW x 1000) / (√3 x Volts). So, Amps = (10 x 1000) / (√3 x 220) = 26.18 amps per phase. Therefore, the total current drawn by the heater is 26.18 amps per phase multiplied by 3, which equals approximately 78.54 amps.
60
Into units of what?
100
If the total bank is 750kVA, full load amps is 902A.
The amperage of a motor is governed by the voltage that the motor operates on. Without a voltage given, an answer can not be given.
It depends on the voltage: 208 v 14 amps, 415 v 7 amps, 480 v 6 amps.
50 kVA is 16.667 kVA per phase and you divide that by the phase voltage. Current = 16667 / 277 = 60 Amps
Pls.answer me of above question
To convert from kilowatts (kW) to amps in a 3-phase system, we need to know the system voltage. Using the formula: Amps = (kW x 1000) / (√3 x Volts), where √3 is the square root of 3. Assuming a system voltage of 120/208V, the amperage would be approximately 135.1 amps.
Depends on the ratings(volts, amps, etc.) Definitely not an AC motor.
To calculate the amperage for a 10kW heater on a 3-phase 220V system, use the formula: Amps = (kW x 1000) / (√3 x Volts). So, Amps = (10 x 1000) / (√3 x 220) = 26.18 amps per phase. Therefore, the total current drawn by the heater is 26.18 amps per phase multiplied by 3, which equals approximately 78.54 amps.
You can convert 1hp in to 745watts off power, and using the power formula I=amps(current) P=power(watts) and U=volts so I=P/U if conected to a 230v supply the current would be 3.23amps and 110v would be 6.77amps
depending on 1phase or 3phase voltage motor , the amphere requirement is found outfor 3phase AC motor use this formula: (HP x 746)/(1.73 x E x Eff x PF)for 1phase AC motor : (HP x 746) / (E x Eff x PF)