Want this question answered?
to cheak the diameter of something
mafanta
In an Experiment to determine the linear expansion of copper, a micrometer screw gauge is one of the apparatus used, and it's usually fixed at the end of the metal rod. Now the reason why the micrometer screw gauge should always be reset back from the end of the bar is to avoid the heating of the micrometer screw gauge which would expand it,hence giving inaccurate measurements when taking the change in length of the rod. Since the experiment is all about linear expansion,it involves heat also. This heat is the one that would heat the rod and after the heat would be uniformly conducted throughout the bar,it would also heat the micrometer screw gauge at the end. This is the reason why it should be reset back from the end of the rod(to avoid it's heating)
The zero error in the vernier calipers and micrometer screw gauge when the O mark on the main scale is not in line with the pointer.
it should be clean and dry there should be no error the thimble shouldnt be too tight
to cheak the diameter of something
A "depth gauge micrometer" is used by engineers. A depth gauge micrometer is a precision instrument used to measure various depths of different items.
A micrometer screw gauge is commonly known as a micrometer. This is a form of calipers used for measuring small dimensions. Screw gauge in extensively used in the engineering field for obtaining precision measurements. The article describes the principle and main parts of a basic micrometer screw gauge.
The caliper and micrometer use a dial or digital readout to measure the distance between the tips. The tolerances of these tools can be under .001 inch, making them extremely accurate.
mafanta
A micrometer (or micrometer screw gauge) measures the volume of a screw.
In an Experiment to determine the linear expansion of copper, a micrometer screw gauge is one of the apparatus used, and it's usually fixed at the end of the metal rod. Now the reason why the micrometer screw gauge should always be reset back from the end of the bar is to avoid the heating of the micrometer screw gauge which would expand it,hence giving inaccurate measurements when taking the change in length of the rod. Since the experiment is all about linear expansion,it involves heat also. This heat is the one that would heat the rod and after the heat would be uniformly conducted throughout the bar,it would also heat the micrometer screw gauge at the end. This is the reason why it should be reset back from the end of the rod(to avoid it's heating)
The zero error in the vernier calipers and micrometer screw gauge when the O mark on the main scale is not in line with the pointer.
Gauge block.
it should be clean and dry there should be no error the thimble shouldnt be too tight
DFT means Dry Film Thickness... The thickness is measured in terms of microns (one millionth of a meter). The instrument used is micrometer gauge or micrometer gauge.
mild steel