0
What else can I help you with?
The amount of frequency deviation for a frequency-modulated signal is determined by the?
The signals frequency directly.
Two signals of 2GHz and 4GHz are frequency modulated on same carrier 10 GHz Find the ratio of frequency deviation if band widths of both are equal?
1:1
What is a carrier and how does it affect what you hear on the radio?
A carrier is a high-frequency signal that carries information on a radio wave. The carrier frequency is modulated to encode audio signals, which are then transmitted and decoded by the radio receiver to produce sound. The carrier frequency determines the station you're tuning into on the radio.
What is difference between modulated wave and carrier wave?
Carrier Wave: A carrier wave is a high-frequency electromagnetic wave that is used as the "carrier" or the base signal in a modulation process. It is typically a pure sine wave with a constant frequency and amplitude. The carrier wave by itself does not carry any information; it serves as a vehicle to carry the information from one location to another. In AM and FM radio broadcasting, the carrier wave is the primary signal transmitted by the radio station. Modulated Wave: A modulated wave is the result of combining the carrier wave with an information signal, such as an audio signal or data. Modulation is the process of varying the characteristics of the carrier wave (either its amplitude or frequency) in accordance with the information signal. There are two common types of modulation: Amplitude Modulation (AM) and Frequency Modulation (FM). In AM, the amplitude of the carrier wave is varied in proportion to the amplitude of the information signal. This variation encodes the information onto the carrier wave. In FM, the frequency of the carrier wave is varied in proportion to the amplitude of the information signal. This variation encodes the information onto the carrier wave. The modulated wave contains the information that needs to be transmitted, and it can be demodulated at the receiving end to retrieve the original information.
What is mien by carrier frequency?
High range of frequency that carries the message signals in transmission of data.after receiving the signals, the detector seperate the message and carrier .
What is base band frequency?
Baseband frequency refers to the range of frequencies over which a signal is transmitted without modulation. In communication systems, baseband signals typically occupy the frequency range from 0 Hz to the upper limit of the signal bandwidth. This is in contrast to passband signals, which are modulated onto carrier frequencies for transmission over a channel.
What is fmcw radar?
frequency modulated continues radar for detecting the target it generates the signals by continuously.
What is a modulated carrier waves?
A modulated carrier wave is the output of a modulator that includes the information of the signal that is applied to the carrier.When a signal typically a piece of music in the range of say 30Hz to 30KHz is applied to an AM modulator (not sure about FM or PM) with a carrier of say 3MHz the output consists of 4 packetsUpper Sideband (Carrier + Signal) 3.000003MHz to 3.03MhzLower Sideband (Carrier - Signal) .297MHz to .299997MHzCarrier 3MHzSignal 30Hz to 30KHzEither sideband in the case of Single Side Band (SSB) or Both (.297MHz to 3.03Mhz) in the case of Double Side Band (DSB) could be referred to as modulated carrier waves
How do you use RF carrier waves to transmet large amounts of data?
RF carrier waves are modulated with the data to be transmitted, typically using techniques like amplitude modulation, frequency modulation, or phase modulation. These modulated signals are then transmitted through the RF channel. To transmit large amounts of data, techniques like increasing the carrier frequency bandwidth, using more advanced modulation schemes, and implementing error correction coding can be employed to achieve higher data transmission rates over the RF carrier waves.
Two signals of 2GHz and 4GHz are frequency modulated on same carrier 10?
Definition: In FM technique, the frequency of the carrier signal changes according to the instantaneous amplitude of the modulating signal. Hence, the frequency of the modulating signal is of irrelevance here and the devition from "fc" will be dependent on the amplitude of the same. considering 2GHz and 4GHz to be digital signal the ratio would be 1:1.
What is the meaning of modulated wave?
Modulation is where an electronic signal (base) is combined with another electronic signal (carrier).The base could be audio, video or digital. The carrier is the frequency that a receiver (radio or television) is tuned to.The modulated wave is the result of this combination.
What type of technology is used in DSL?
At the simplest level of explanation: frequency division multiplexing (FDM) with a 3 KHz baseband for telephone audio, a wider modulated carrier band for internet data, and sometimes one or more 6 MHz modulated carrier bands for TV station signals. The exact technical and electronic design details are somewhat different in different versions of DSL.
