0
What else can I help you with?
What is the oil pressure for the dg sets?
The oil pressure for the DG sets depends with the load.
What are the main parts of DG sets?
There are three main parts of dg sets one is avr and anotther one is coolent oil level
What is safety device of diesel generator?
Actually safety devices of generator depends on the type of prime mover used in generator. The main safety devices in a DG Set is to control the over speed, to limit the fuel supply in case of emergency. It is regulated by the governor of the DG Sets. In external safety, over voltage & over current tripping relay i.e. associated with DG Sets control panel.
What is the oil sump capacity of a Mitsubishi challenger 2.8 diesel?
sump capacity means the oil capacity for the requirements of DG sets. Which is required for controlling, maintanance of DG sets
What is Control panel explain?
control panel is amaage fui.
What tool is used to enable remote desktop on a server?
System Properties in Control Panel.
How do you change the control panel back to icons?
In Windows XP, go to Control Panel, and on the panel on the left side of the window, click "Switch to Classic view".In Windows Vista, go to Control Panel on the panel on the left side of the window, click "Classic View".In Windows 7, in the Control Panel, click "All Control Panel Items".
Where do you find the nvidia geforce control panel on computers?
In the computers control panel
What is a control panel password?
A password you need to change things in the control panel.
What windows feature do you use to customize computer setting?
The Control Panel
How do i synchronize three generators in parallel using controllers?
I assume you are asking about AC generators. The controller is wired up with suitable transducers and other control wiring to obtain required signals from the electrical bus. Three DG sets are feeding the common bus bar through isolating breakers. Conditions for a successful synchronization are equal voltage, equal frequency (Hertz) defined by the speed, same phase sequence. (say R Y B phases must match with R Y B of the incoming DG set) One DG is started with some load (at least 60 to 70 % of load) and the common bus is energized. The second DG to be brought in by closing the breaker either manually or automatically. Start the second DG. The controller reads the bus parameter and incoming DG parameter in real time and moment the incoming DG parameters match with running DG parameters, controller allows the incoming breaker to close. Both DG are now synchronized and load is shared. Same way put on third DG set and synchronize.
Dg set start from amf panel but not stop from amf panel?
1) stop solenoid relay not work 2)under volt relay floaty 3)amf card folaty
