0
use to run motor
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you get an equivalent three phases power from a single phase?
You cannot obtain a three-phase supply from a single-phase system without using some sort of rotary converter.
Is line to line fault a 3 phase fault?
'Line conductors' are the three 'hot' conductors (A-B-C) that connect a three-phase supply to a three-phase load. In some cases, a pair of line conductors (e.g. A-B, B-C, or C-A) is used to supply a single-phase load. A 'line fault' can be a short-circuit fault between all three, or any two, of these line conductors -whether they supply a three-phase load or a single-phase load.
How do you wire three phase into the mains?
In the UK, the term, 'mains', refers to the supply voltage provided by the distribution system. In most residential properties, the mains' supply is single phase (there are exceptions: some European countries have three-phase supplies), in which case you cannot 'wire' a three-phase load such as an induction motor into the mains.
Is house current fit for single or three phase motor?
House current is single phase.AnswerIt depends on the system supplying your residence. Most are single phase, but some, such as here in Cyprus, have a three-phase supply as standard.
Vlotage on motor name plate is line or phase voltage?
The voltage tag on a motor says 120 or 220 volt and some motors have jumpers to wire it for either one. That is the supply line voltage. The motor knows how to use that. If the plate says three phase is required then consult your electic supply Company for a three phase supply line.
Why single phase is preferred to three phase?
Single phase is not preferred over three phase, it is the system used that the application needs to operate with. There are more single phase installations than three phase due to the fact homes operate on that system. Where as most commercial and industrial applications call for a three phase system to supply their power needs.Single-phase and three-phase are different types of power supply.Most houses and small businesses have a single-phase supply, which could be a simple live/neutral two-wire supply, or a split-phase supply with two lives and a neutral so that there is 120 v between the neutral and either live wire, but 240 v between the two live wires, which is used for loads of over 1500 watts.When necessary, properties that use more power have a three-phase supply which has three live wires and a neutral. The supply can be taken in the form of three separate single-phase supplies, or in some cases appliances such as large motors need a three-phase supply to work correctly.A three-phase supply is described by the voltage between any two of the three live wires, and the voltage from neutral to each live is 1/sqrt(3) times as much, in other words 42% less.Typical three-phase supplies are 120/208 v, 230/400 v, 240/415 v, 277/480 v and 347/600 v. The first figure is the live-neutral voltage and the second is the live-live voltage. Single-phase supplies can be taken between live and neutral or between lives.Three-phase is preferred for power transmission over longer distances, and voltages up to hundreds of kV are used. In this case the neutral is omitted because when the three currents in the live wires are equal the current in the neutral is zero.
Can different size conductors be used on a three phase supply?
In normal use a 3-phase supply is balanced so that the three phase wires would be of equal size because they carry equal current. When in balance the system draws no current in the neutral wire (if present). In some conditions different currents are taken from a 3-phase supply, for example three houses connected to the different phases will probably take different currents, and in that case the neutral could carry a current up to or equal to that in one of the phase wires. Therefore in supplying a street, the four wires of a 3-phase supply would all be of equal size.
Why is there a difference between a domestic and industrial electricity supply?
actually there is no difference between them. However in some counteries, single phase is used for domestic and three phase is used for industrial.
Can you connect a 3 phase motor to a 1 phase supply?
Single phase to three phaseThe physical internal windings between single phase and three phase motors makes this an impossibility That being said money can make anything happen. Depending on the amount of money you want to spend to make this happen there is a device on the market called a VFD ( Variable Frequency Drive). On the three phase input terminals you apply your single phase voltage. On the output terminals you connect your three phase motor. When run in this configuration there is an internal switch that has to be changed to let the VFD know that it should be looking for only two lines on the input to be hot. Other wise the VFD thinks that there is a line loss on the three phase input terminals and the unit will not start.Some 3 phase motor speed controllers can be run off a single phase supply, this caused us a problem at work when a new speed control was fitted to some laundry equipment, as we then had to rewire the supply to bring in a nuetral, so i suggest a speed controller is probably the solution.
Why does a single phase synchronous motor need a capacitor but for a three phase motor it is not required?
A three-phase motor has a rotating magnetic field inside that is set up by the supply, so the armature always rotates in the correct direction. A single-phase motor can in principle start either way so it has a starting winding supplied through a capacitor to provide a small component of rotating field to get it started the right way. After it has picked up speed the starting winding can be switched out.
Why AC three phase apparatus are more popular compared to single phase?
the main advantage of having three phase supply is that the total load of house or a factory is divided into three pars so that none of the line is over loaded.moreover the three phase also provide 400 V which can also used to operate some special appliances.
Can you use three phase power for a dwelling unit service?
noAnswerWhereas most countries have single-phase residential supplies, some countries, such as Cyprus, often have three-phase supplies. The main distribution panel ('consumer unit') must be designed and assembled to accommodate either a single-phase supply or a three-phase supply; you cannot use a single-phase distribution panel with a three-phase supply.
