White thinset
White or Gray Thinset would be indicated & best
The best adhesive to use for installing porcelain tile is a modified thin-set mortar.
Thinset tile cement.
Thinset mortar. There's a special one for porcelain tile; any thinset will work for regular ceramic tile.
To ensure a secure and long-lasting bond when applying porcelain tile adhesive, it is important to follow these best practices: Prepare the surface properly by cleaning and leveling it. Use the correct type of adhesive for porcelain tiles. Apply the adhesive evenly and with the right trowel size. Press the tiles firmly into the adhesive to ensure good contact. Allow sufficient time for the adhesive to dry and cure before grouting.
When applying tile adhesive for porcelain tiles during a home renovation project, it is important to follow these best practices: Ensure that the surface is clean, dry, and free of any debris before applying the adhesive. Use the correct type of adhesive recommended for porcelain tiles. Apply the adhesive evenly using a notched trowel to create a consistent layer. Press the tiles firmly into the adhesive, making sure they are level and aligned properly. Allow the adhesive to dry completely before grouting the tiles.
Can I use water & vinegar to clean porcelain plank floor tile
Use a good mastic or adhesive
To fix a chipped porcelain tile, you can use a porcelain repair kit or epoxy adhesive to fill in the chip. Clean the area thoroughly, apply the repair material, and let it dry according to the instructions. Sand down any excess material and apply a matching touch-up paint if needed.
Use silicone .
The most effective method for removing tile adhesive using a tile adhesive remover is to apply the remover according to the manufacturer's instructions, allow it to penetrate the adhesive, and then use a scraper or putty knife to gently lift and remove the softened adhesive.
Porcelain is usually sealed already. You then add sealer to the grout.