Want this question answered?
If the transformer uses 5 watts per hour you need to know what you are paying per 1000 watts from your power company. If you pay lets say $3.00 for 1000 watts then when your transformer burns 1000 watts it cost you $3.00 your cost will be $3.00 for 200 hours run time.
Two formulas are needed to calculate the answer:[Energy (watt-hours)] = [Power usage rate (watts)]? x [Time (hours)]and[Power usage rate (watts)] = [Voltage (volts)] x [Current (amps)]?
you must check the voltage and current rating for the heater, the power itself doesnt matter Concur - Some heaters may be rated for the higher voltage which requires less current to run. Watts = Current * Voltage. You risk a fire if you try to run heater above its rated values which should be on a plate on the appliance.
No a 230 volt appliance should not be pluuged into a 110 volt socket (And vice versa) you need to buy a converter that can be plugged into the 110 volt outlet then the appliance can be plugged into the converter.
converters are usually listed in Watts output- sometimes with a surge wattage about 2 times the normal running wattage- motors usually have a surge need to start and then even out- so assuming this motor runs at 14amp= Watts = volts X amps, you should need 1540 watt converter- 2000 watt converter to be safe
some kinds of microwaves
If the transformer uses 5 watts per hour you need to know what you are paying per 1000 watts from your power company. If you pay lets say $3.00 for 1000 watts then when your transformer burns 1000 watts it cost you $3.00 your cost will be $3.00 for 200 hours run time.
The formula for watts (or power) is Amps times voltage. Therefore with a 6 amp draw times 120 volts would be about 720 watts. A 1000 watt power inverter would do the job.
Two formulas are needed to calculate the answer:[Energy (watt-hours)] = [Power usage rate (watts)]? x [Time (hours)]and[Power usage rate (watts)] = [Voltage (volts)] x [Current (amps)]?
You may be able to get away with powering a natural gas stove or LPG stove on this wattage because it doesn't use heavy amperage to pull the surface ignitor to 1200 degrees or to run the sparkers which are only lit momentarily, however on an electric stove you would need 1000 watts or 3000 watts if you're trying to use a power converter off a 12v battery or something of that nature. It's probably not a good idea. You need a good 220 outlet for an electric stove.
Depending on the size of the TV, somewhere between 0.3 and 0.7 KW. The nameplate of the TV usually lists the watts, divide watts by 1000 to get KW.
you must check the voltage and current rating for the heater, the power itself doesnt matter Concur - Some heaters may be rated for the higher voltage which requires less current to run. Watts = Current * Voltage. You risk a fire if you try to run heater above its rated values which should be on a plate on the appliance.
Kilo simply means 1000. Volt-ampere (VA) is a measure of power, similar to the watt. Volt is a measure of voltage, or electrical pressure. Voltage means electricity is available, but unless it is actually used, no current (amperes) flows, and no work (power) is done. Suppose you have a motor that needs 1000 volts to run, and when it is on it draws one ampere (amp) of current. We would say the motor supply voltage is one kilovolt. When the motor is running, we would say it uses one kilovolt-ampere (1KVA) of power (1 ampere * 1000 volts = 1000 VA or 1 KVA).
1000 watts per hour is a kilowatt hour and is usually 10 cents
No a 230 volt appliance should not be pluuged into a 110 volt socket (And vice versa) you need to buy a converter that can be plugged into the 110 volt outlet then the appliance can be plugged into the converter.
how many watts does it take to run a paint sprayer
2100 watts to run the refrigerator