50-200
yes zero one sells an m9 barrel thread that can attach a silencer
You will need to ask a gunsmith
Yes, if it is a modern Remington barrel because these barrels come pre-threaded and accept REM chokes (and many other manufacturer's chokes made for the Remington barrel). Otherwise it will have the choke description stamped on the barrel like, "FULL". I have an older Remington barrel that was a "FULL" choke that I had a gunsmith thread for me. The ability to thread a barrel for chokes will depend on the thickness of the barrel wall. Consult a trained gunsmith.
It depends, dose your your sniper have threds? Type airsoft sniper silencer on Google and you will get something.
A silencer tube is the housing that ultimately contains the hot, high pressure gases leaving the end of the barrel and allows them to cool and expand before leaving the end of the silencer.The silencer tube is filled with materials, often baffles, that help divert the gas from the path of the bullet and produce turbulence to slow its escape.In many cases, if you take the silencer tube away you just have a piece of metal that threads onto your barrel and a bunch of baffles in your hand. You would attach the tube to the thread mount, fill it with baffles, and screw the end cap on to have yourself a functioning silencer.
Thread count is a textile term. however The pro carbine has A5 barrel threads.
The threads are Tippmann Barrel Threads
What is the thread size for a Winchester Model 90?
Yes you can put a silencer on the G36C but you may already know it's not going to silence the gun overall. I'm recommending a barrel extension, its like a silencer. I looks like one and it effects the range and accuracy as if it was actually was the real thing. For the G608-6 it's thread should be 14mm CC(counter clockwise) and i myself am using a Matrix Steel 4.5" Outer Barrel Extension for Airsoft AEG (14mm Negative / Counter-Clockwise) but if you want a shorter one i recommend the Matrix 2" Outer Barrel Extension - 14mm Negative. it's only a $3 difference and they are both really cheap at $12 and $15.
M18x1
Normally performed using a lathe.
Any apex barrel with a 98 thread will fit the alpha black.