0
What else can I help you with?
What are circuit board connectors used for?
A circuit board connector is used to mechanically support and connect electronically the various components of a circuit board. It does this using conductive pathways and signal traces.
How the information is transformed from one component to another component in a system?
By wires embedded into the pc boards and connectors on each component connected to the board. These connectors and wires are usually either gold plated or made of solid gold for the fastest data transfers.
What two connectors does the AT board use?
P8 and P9
What connector is used to connect 10Base5 to a PC's network card?
I think it uses BNC connectors.
What holds the circuit board?
On modern PCs this is the PCI or PCI-e connectors. At one end, the cards are secured by a metal bracket that is clamped, usually by a screw, onto the PC case frame. This bracket also has the external connectors for the card, like 3.5mm jacks or VGA connectors, etc. Along the inside edge the card electrically plugs into the PCI/PCI-e connector. On the opposite edge or the outside edge of the card on some are internal connectors, like SATA connectors or extra power connectors for power hungry video cards.
Can I use the same media hub with a PC and a Mac?
It depends on the type of hub. Most connectors can be used on both a PC and Mac, as long as there is a port for it. Be sure to read the system requirements before making a purchase.
How are keyed connectors designed to be inserted?
Keyed connectors are designed to be inserted only in one direction. Keying is used as a safety feature to prevent wrong orientation/plug in which may lead to damaging the connector/circuit board
Is their iron in a mobile phone?
No, no parts of cell phones or mobile phones are made of iron. The metals used in these phones are:Aluminium (covers, frames, battery, circuit board.)Antimony (covers)Barium (circuit board)Beryllium (connectors)Cobalt (lithium-ion batteries)Copper (circuit boards, wires, connectors, batteries)Chromium (cover, case)Gallium (LED light)Gold (electronic parts, connectors, circuit board)Indium (screen)Lead (circuit board)Manganese (circuit board, case)Nickel (battery)Palladium (circuit board)Platinum (circuit board)Ruthenium (circuit board)Silver (circuit board)Iron is heavy, gets warm quickly and reacts with moisture in the air leading to rust, so iron is not a suitable metal for a phone.
IBM PC 5150 mother board?
The IBM PC 5150 motherboard is a system that was used in the 1980s. Designed for home computing, it was a standard for about 7 years.
When the AT motherboard connectors were installed what wires needed to be together?
In an older standard powered motherboard the P8 and P9 connectors connect to the mother board; backwards installation can be potentially harmful to the mother board. P8 and P9 are unkeyed connectors. The installation requires that the connectors are lined up with the black wires together in the middle. source--- It essentials cisco website.
What is molex and berg connectors?
Molex is the power plug type used for hard drives and CD drives in older PATA-type PC's. Berg is the same, except used for floppy drives.
How are boolean connectors used to aid in research?
how are boolean connectors used to aid in research
