0
What else can I help you with?
Do the rims for my 2002 Town and Country have to be hub centric?
The factory wheels are. Aftermarket wheels will probably stud center.The factory wheels are. Aftermarket wheels will probably stud center.
Do peugeot 106 alloy wheels fit a peugeot 205?
Yes, as long as your wheels are 4 stud. Some peugeot 106 models are 3 stud.
How do you remove a lug nut when the wheel stud is also turning on aluminum wheels?
You will have to drill or cut the stud off.
Which 4 stud wheels are 114 mm diameter?
Peugeot
Where can one purchase 3 stud alloys?
There are a number of automobile parts retailers where one can find 3 stud alloy wheels for their automobile including Gumtree, Alloy Wheels and eBay.
Will mr2 mk1 wheels fit mr2 mk2?
Unlikely, the MK1 is four stud, a mk2 uses 5 stud
Are silverado 1500 and s10 wheels interchangeable?
No they are not the with of the stud holes are different.
How can I find a stud in the ceiling?
To find a stud in the ceiling, you can use a stud finder tool. Move the stud finder along the ceiling until it indicates the presence of a stud. You can also look for visual clues like nail heads or use a small drill to make a pilot hole to confirm the stud's location.
What is the wheel stud thread size on a 91 buick century. putting after-market rims on and don't know what size lugs to buy?
12mm by 1.5
Will a 5x100 stud pattern fit on a 5x120 stud pattern?
No, a 5x100 stud pattern will not fit on a 5x120 stud pattern because the number and placement of the studs are different. The studs need to align perfectly for the wheels to mount correctly on the hub.
How to properly screw into a stud?
To properly screw into a stud, first locate the stud using a stud finder. Once located, mark the spot and use a drill to create a pilot hole slightly smaller than the screw. Then, drive the screw into the stud using a screwdriver or drill until it is secure.
Where is the solenoid is on the 1993 Ford Explorer?
On the inside of the fender just behind the battery. It has two cables attached to lugs, and a small wire at the bottom that is pressed on to a stud.
