Power factor ranges from zero to a maximum of 1. At 1 the current and voltage waveforms are in phase and operate at maximum efficiency.
its nothing
Diesel Engine has high load factor
at lower power factor current drawn by load is high and at higher pf the current drawn is less...
because of high resistance in the load.
quasi means half then VSI and CSI combined to maintain unity power factor.
The power factor measures the phase difference between a current and a voltage waveform. Power factor ranges from zero to one. A power factor of 1 is for a pure resistive load. Power factor decreases for loads like motors with high inductance. Power factor comes into play when determining the watts used by a device. Watts = Volts x Amps x PF. So ideally for efficiencies sake, you want to keep the PF as close to one as possible.
There is no disadvantage of unity power factor, because at unity power factor all the electrical power is efficiently utilized by the the load, and at lagging power factor some power is lost in the load's magneticfield.
Diesel Engine has high load factor
at lower power factor current drawn by load is high and at higher pf the current drawn is less...
they provide high amount of power and electricity
See Related Links
Power transformers can be used for power transformation. Voltage transformers are not suitable for high power applications.
because of high resistance in the load.
Power factor is determined by the nature (resistive, inductive, capacitive) of a load, not whether it is a low load or a high load.
quasi means half then VSI and CSI combined to maintain unity power factor.
low power consumption, high efficiency,more output power are some of the advantages of camless engine by SHEKAR...VCE COLLEGE,MECHANICAL ENGINEERING III YR
The power factor measures the phase difference between a current and a voltage waveform. Power factor ranges from zero to one. A power factor of 1 is for a pure resistive load. Power factor decreases for loads like motors with high inductance. Power factor comes into play when determining the watts used by a device. Watts = Volts x Amps x PF. So ideally for efficiencies sake, you want to keep the PF as close to one as possible.
ex-post factor