0
What else can I help you with?
1996 Dodge Caravan misfiring?
Check spark plugs, plug wires, do a compression test
How do you cure an engine misfire.?
Check Spark plugs Check plug wires Do a compression test
What should you look for when you get a reading that number1 cylinder misfired?
Spark plug, wires, low compression due to burnt valve, blown head gasket, or cracked head. A simple compression test will eliminate some items. Start by replacing the plugs & plug wires.
Ford focus 2002 running on 3 cylinders?
Check the spark plugs and wires Do a compression test
95 S10 pickup rough running and misfiring?
Check spark plugs and wires Do a compression test
Why would a 1994 ford explorer miss even after changing plugs and wires?
low compression in one of your cylinders
What is code P0300 random misfire detected P0302 on a Toyota celica gt and how do you repair it?
P0300 : multilple misifreP0302 : misfire cylinder #2Check plugs, wires, injector, compression, etc.see related question below.P0300 : multilple misifreP0302 : misfire cylinder #2Check plugs, wires, injector, compression, etc.see related question below.
How do you change spark plug wires on a 1983 300d turbo diesel?
A diesel engine doesn't have spark plugs or spark plug wires.
What are causes for rough idle misfire when stopped changed wires plus gas filter rotor and cap?
Run a compression test.
How do you compression test a 1993 Buick Skylark Custom?
The compression tester has a plug that goes in the spark plug hole and reads the compression within the cylinder. Remove the sparkplugs. (Mark the plug wires with masking tape so you can put them back where they belong) Insert the compression tester and have someone activate the starter and roll the engine over a few times.
Why would a car not have all the cylinders firing even after replacing the spark plugs and wires?
You distributor cap and rotor should also be replaced. If still no spark. check the compression on the low cylinders to see if you have good compression.
Why is my 1990 Honda accord missing ive changed the plugs and wires and still no luck?
Do a compression test to determine condition of engine internals
