0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
The network administrator needs to connect two routers directly via their FastEthernet ports What cable should the network administrator use?
straight cable is needed when connecting two computer periperhals. A cross over is used when connecting a computer to a network hardware (router, swirch, etc..)
How you can connect a computer to another computer by a single networking cable?
You have to have a special cable which is "cross connection cable" or something like that.
Compare the advantages and disadvantages of cross cable and straight cable connection?
1. straigth cable are more effective than the crossover cable....
What kind of cable do you need to transmit information between computers?
Depends on the way you want to connect them. Most probably you want to connect them using network interfaces. In that case you have to use cross-over cable. Straight cable, the sort you would use to connect your computer to a wall network socket, will not work.
What Type of cable to connect PC to PC?
You need what is called a crossover cable. This cable is special because there are a few wires switched that allow the computer to send and receive all has to do with the network card and how communcation is done. Answer: Correct - The wires within each terminal end of the cables are switched So the Transmit pin connection on one end of the cable is the Receive pin on the other. It's where the term crossover came from. Typically crossover cables are yellow, and can usually be bought at any computer store.
What are the step to create cross network cable?
To create a Crossover Cable, wire one connecter to the T568A Network Standard and wire the other connector to the T568B Network Standard, so the cable 'crosses over', A becomes B and visa versa.
How to make Direct network connection?
For a direct network connection between two devices you need a cross-over cable.
What type of cable do you use for network of two computers?
you can use any of the following cables: 1) Cross Over cable 2) LAN cable 3) Ethernet cable
What is the type of network called that connects two computers directly together using a cross-over network cable?
If both PCs have ethernet cards, the best cable to use would be a crossover cable. A crossover cable is almost the same thing as a regular ethernet cable, except the wires inside the connector are reversed on one end. This reversing of the wires allows you to connect a crossover cable between two PCs without any other network equipment like a switch or a hub.
Two compuers share two printers?
Yes, you can connect one printer to each computer and connect both computers on a local network, then install the network printer from each other's computer. Or you can give printer servers to two different printers.
How do you know that your crossover cable is good?
You can use an ohmmeter to test the continuity of all wires. Alternately, you can put it in place of a known working cross-over cable and see if the network connection still functions. Remember that many modern network devices detect whether the cable is straight or cross-over, so perhaps you don't even need a cross-over.
Difference between Straight cable and Cross Cable?
what is different between cross cabling and straight cabling ANSWER: a crossover cable is used to connect like devices, like a router to a router, but a straight through cable is used to connect dissimilar devices, like a router to a computer.
