Slump test is the most commonly used method of measuring workability of concrete.It does not measure all factors contributing to workability, nor is it always representative of the placability of the concrete.However, it is used conveniently as a control test and gives an indication of the uniformity of concrete from batch to batch.
Advantages of using scientific methods: You can test in many different ways, and the more times you test, the more accurate your results will be. Disadvantages of using scientific methods: You can come up with different results which can disprove your hypothesis, and this leads to inconsistent conclusions.
identify three major disadvantages of test marketing and propose how each one can be avoided
you get in trouble with the teacher, you miss the lesson, and you will probably fail the next test you have on the subject you were talking in
three disadvantages cyanmethemoglobin
Type of slump test are,True slumpShear slumpCollapse slump
A shear breaks off or crumbles. A slump stays together however it will slump down.
The slump test is the most widely used device worldwide. In fact, the test is so well known that often the terms workability and slump are used interchangeably, even though they have different meanings. • Specifications are typically written in terms of slump. • The slump test is simple, rugged, and inexpensive to perform. Results are obtained immediately. • The results of the slump test can be converted to yield stress in fundamental units based on various analytical treatments and experimental studies of the slump test. • Compared to other commonly used concrete tests, such as for air content and compressive strength, the slump test provides acceptable precision.
The slump test is the most widely used device worldwide. In fact, the test is so well known that often the terms workability and slump are used interchangeably, even though they have different meanings. • Specifications are typically written in terms of slump. • The slump test is simple, rugged, and inexpensive to perform. Results are obtained immediately. • The results of the slump test can be converted to yield stress in fundamental units based on various analytical treatments and experimental studies of the slump test. • Compared to other commonly used concrete tests, such as for air content and compressive strength, the slump test provides acceptable precision.
The importance of slump test in concrete work is to ensure consistency in the concrete. The test measures the workability of the concrete.
The importance of slump test in concrete work is to ensure consistency in the concrete. The test measures the workability of the concrete.
The concrete slump test is used to measure an aspect of concrete. This test is used to measure the workable of concrete as well as its freshness and health.
Slump test is the most commonly used method of measuring workability of concretewhich can be employed either in laboratory or at site of work.It is seen that the slump test gives fairly good consistent results for a plastic-mix.
compaction factor test is better than slump test,because compaction factor test should have own compaction wight,so correct value will be find out from compaction factor test.........
The slump test gives fairly good consistent results for a plastic-mix. This test is not sensitive for a stiff-mix. In case of dry-mix, no variation can be detected between mixesof different workability. In the case of rich mixes, the value is often satisfactory, their slump being sensitive to variations in workability.
the workability of a concrete mixture
Slump test is the most commonly used method of measuring workability of concretewhich can be employed either in laboratory or at site of work.It is seen that the slump test gives fairly good consistent results for a plastic-mix. This test is not sensitive for a stiff-mix. In case of dry-mix, no variation can be detected between mixes of different workability. In the case of rich mixes, the value is often satisfactory, their slump being sensitive to variations in workability.