Risk impact definitions will have relatively low thresholds if stakeholder' risk tolerance is low
If stakeholders' risk tolerance is high, thresholds for defining impact will also be high.
No
Ideal range means the normal operating conditions, and range of tolerance means the extreme varied conditions in which operation can continue, without failure
The weight tolerance is +or- 1.5 grains
To improve your confidence level and risk tolerance a person must be willing to try new things. When trying new things a person should also have a back-up plan in case things do not go exactly as planned.
Cover is the distance from the surface of the concrete to the surface of the reinforcement bar. Nominal cover (Cnom) is the cover that the designer, and steel fixer tries to achieve. Minimum cover (Cmin) is the absolute minimum cover that must be maintained for durability reasons after taking into account deviations in as built cover. Acceptable values of Cmin are given by BS8500 and EN 206. (Warning prior to BS8500, and EN206 minimum cover was also used as a term to describe nominal cover to the outer layer of bars). Δc is the cover tolerance. (Cnom must be >= Cmin + Δc) Note: bar bending/cutting tolerance for bars fitting between two fixed faces (defined in BS8666) is allowed for separately by reducing the scheduled dimensions of bars fitting between two fixed faces by +5mm (bending) +25mm (cutting) in the bar schedules.
High risk tolerance means high impact thresholds
-High risk tolerance means high impact thresholds
High risk tolerance means high impact thresholds.
ignorance can be cure, hence can be lifted by opening mind, the tolerance o influences and accepting all of them, taht can positively enlighten and no holding any bias
Acronym of TOLERANCE
This is designated as the organisms fitness.
The tolerance curve shows an organism's tolerance limits.
There are many different types of tolerance that the body can take like pain tolerance. Patience is also a form of tolerance. There is also tolerance of other races, religions, and sexual preferences.
They were held in honour of the god Zeus. Christian emperor Theodosius showed his Christian tolerance by banning them.
In engineering, general tolerance refers to the overall tolerance. A specific tolerance would be noted on a blueprint when an area requires a tolerance which is different than the overall project.
Religious tolerance
Tolerance has a limit means tolerance is a capability and every capability has a limit