Different ways to induce current in a coil are as given below:
(1) If a magnetic field is changed round a coil then an induced current is set up in the coil. It can be done by taking a bar magnet and bringing it closer to the coil or taking it away from the coil.
(2) If a coil is moved in a magnetic field, then again an induced current is set up in the coil.
(3) If a coil is rotated in a uniform magnetic field, it may also cause an induced current in the coil.
(4) If we take two coils and insert them over a non conducting cylindrical roll then on changing current flowing in one coil, an induced current is obtained in the other coil.
CommentYou don't induce a 'current' into a coil; you induce a voltage. If that coil is open circuited, then no current will flow. If, on the other hand, the coil is connected to a load, or its opposite ends short-circuited, then the induced voltage will cause a current to flow. Remember, current will only flow if there is a load, or short circuit, and the value of the current will depend upon the value of the induced voltage and the resistance of the load or short circuit.
Different ways to induce current in a coil are as given below:(1) If a magnetic field is changed round a coil then an induced current is set up in the coil. It can be done by taking a bar magnet and bringing it closer to the coil or taking it away from the coil.(2) If a coil is moved in a magnetic field, then again an induced current is set up in the coil.(3) If a coil is rotated in a uniform magnetic field, it may also cause an induced current in the coil.(4) If we take two coils and insert them over a non conducting cylindrical roll then on changing current flowing in one coil, an induced current is obtained in the other coil.CommentYou don't induce a 'current' into a coil; you induce a voltage. If that coil is open circuited, then no current will flow. If, on the other hand, the coil is connected to a load, or its opposite ends short-circuited, then the induced voltage will cause a current to flow. Remember, current will only flow if there is a load, or short circuit, and the value of the current will depend upon the value of the induced voltage and the resistance of the load or short circuit.
Speed of movement of coil and the number of turns in the coil
You can induce a larger electric current by either increasing the strength of the magnetic field or increasing the speed at which the magnet moves through the coil of wires. Both of these factors contribute to the rate at which magnetic flux changes, resulting in a larger induced current in the coil.
You can induce an electric current in a wire by moving a magnet near the wire, passing a current through a nearby wire, or changing the magnetic field around the wire.
There are two ways of doing this; 1) moving a magnet perpendicular(at right angles) to a coil of wire 2) placing a coil of wire in close proximity to another coil carrying an AC current.
There are 2 ways:-By increasing the intensity of the current flowing to the pump.By increasing the number of turns in the coil.
I am sure you mean a Tesla coil. Word of warning, if you don't have experience in the field, don't try to do it on your own. There is more written on how to make one. In your internet search engine type making a Tesla coil and in the answer page you will get many ways to create your own.
compressing a coil in a magnetic field means that there is a relative movement of the the said coil existing in a magnetic field, hence current will be induced. induction law.Another Answer'Current' is not induced into a coil. It's voltagethat's induced; if the coil forms a closed loop, then current will flow; if there is no closed loop, then no current will flow.The induced voltage results from either a change in current through the coil, or from the relative movement between the coil and an external magnetic field.
Increasing the number of turns in the coil and increasing the current flowing through the coil are two ways to make an electromagnet stronger. These actions result in higher magnetic field strength and therefore, stronger magnetic attraction or repulsion.
there are 3 ways,*changing the number of coils of wire,*changing the current in the wire,*changing the material used for the core.sidenote - i just saw this answer and its perfect, really. simple and just the three points i needed for homework!how could you make them stronger
Some ways to magnetize something include stroking it with a magnet in the same direction repeatedly, exposing it to a strong magnetic field, or using an electric current to induce magnetism temporarily.
I did by cumming, or having sex! Best way because it starts your contractions.