Want this question answered?
Look up the remote code at http://www.dynexproducts.com/universalcontrolcodes.aspx Dynex is a subsidiary of best buy. Use Emerson codes instead.
Hope this helps anyone like myself that was trying to set the remote codes on a Yamaha Receiver remote for a Dynex TV. I have a 32" Dynex in a second viewing area that I wanted to control with the RAV367 remote from my Yamaha RX-V1800 AV Receiver. I went through dozens of codes gathered from numerous websites, all with no luck. I finally decided to try programing it directly remote to remote with Yamaha's "Programing codes from other remote controls" chapter on page 104 of the RX-V1800's owner's manual. To my delight it worked perfectly and I now have most of the remote commands I use most often. The only alteration I made was to use the "TV Mute" control button on the RAV367 to set the TV input from the Dynex remote while using the "TV Input" button on the RAV367 to control the HDMI input. Other than that slight alteration every function I normally used on the Dynex remote I can now control with the Yamaha remote. I hope this helps.
For compatibility with other universal remotes, use codes listed for these brands: Orion, Emerson, Memorex, Sansui, Sylvania, Zenith I have a 26in Dynex lcd tv. I was able to use an Emerson code to get my Philips remote to work.
Go to the company's website for this info.
I would check the internet
Here are the codes for your Dynex TV: 720 and 727Here is the instructions for programming the remote to your Dynex TV.Remotes: Basic (Television Only)Turn the Television On.Press and hold clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
What is the code for comcast remote for Supersonic TV
Another code you can use for your Dynex TV is 727. I have provided instructions on how to program your remote to your TV.Remotes: Basic (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.720 just worked for me, 42" LCD096 worked for my Dynex and the other website said that it generally works with most store brand tvs.
the t.v brand is durabrand and good luck finding a replacement remote
I just bought the Samsung BD-C5500 HTiB and used code 85 listed under Emerson to control my Dynex 40" LCD TV. It does not seem to work for "Function/TV Source" but Power, Vol & Tuning/Ch work well.
The code for the Dynex 32"lcd TV dx-32L152A11 on bell Express tv is 720 #. that is the code that worked for me
The Top 10 codes available for that Sony product are listed below! Codes: 500, 837, 090, 677, 185, 000, 511, 808, 846, 798