Two resistors wired in parallel means that both resistors are soldered together to equal the value of a smaller resistor value. Both resistors will be connected to the same line on the circuit board and then both will terminate on the same final line they are assigned to. Thus, a pair of 100k ohm resistors can take the place of one 50k ohm.
It represents that two resistors are connected in parallel.
In parallel resistors, the voltage across each resistor is the same, but the total voltage across all resistors may vary.
Resistors are in series if they are connected end-to-end, creating one path for current to flow. Resistors are in parallel if they are connected side by side, providing multiple paths for current to flow. You can determine if resistors are in series or parallel by examining how they are connected in a circuit.
Measure the voltage appearing across each resistor. If they are identical, and equal to the supply voltage, then the resistors are in parallel.
The resistors should be connected in parallel .
parallel combination of resistors are used in house circuits
RParallel = 1 / Summationi=1toN (1 / Ri)
Both resistors will have the voltage of the battery.
Resistors connected in parallel have the same voltage across them, while resistors connected in series have the same current passing through them. In a parallel configuration, the total resistance decreases as more resistors are added, while in a series configuration, the total resistance increases.
Parallel resistors act like a resistor smaller than the smallest parallel resistor. Calculate as 1/(1/R1+1/R2+1/R3...)
If you need a resistor of a certain value, and you have no resistors with small enough values,you can create the one you need by connecting several of those you have in parallel.The effective net resistance of resistors in parallel is always less than the smallest individual.And the more resistors you add in parallel, the smaller the net effective resistance becomes.
When resistors are connected in series, the total resistance is the sum of the individual resistances. When resistors are connected in parallel, the total resistance is less than the smallest individual resistance.