refers to various ways of making a magnet from magnetic materials.they include: stroking method, electrical method, magnetism through hammaring among others
*Induction *Stroking method : 2 types which are single touch method and double touch method *Electrical method ( By keeping the material to be magnetized in a solenoid and passing Direct current through it)
The three methods to make magnet are:
induction: the process of producing a electric or magnetic effects in a material with an electric charge or a magnet.
stroking: is the process of rubbing in one direction.
electricity: is a process to do with electric charge, particularly the use of electric energy.
The three methods of making magnets are:
1. Single touch method
2. Double touch method
and by electrical method.
1. Increase the current
2. Increase the amount of turns in the coil
3. Add an iron core to the solenoid
By heating it up and then quickli cool it under cold water, by hitting a magnet with a hammer or simply by dropping it on a hard floor..
Hareema Amber
change the orientation, change the direction of the current in the coils, and change the direction of the magnet through the coils.
follow me on twitter @StoryOf_Devonte
the current from the battery controls the strength of the electromagnet. Adjusting the voltage will also adjust the current as will adjusting the resistance in accordance with Ohm's Law. Current= voltage/resistance
to describe earth's magnetic field, there are three magnetic elements of earth listed as under, 1. angle of declination 2. dip 3. horizontal component of earth's magnetic field
-by increasing the planting -
Magnetic materials may contain any mixture of certain elements. Three of the most common elements are iron, nickel and cobalt.
Movement conductor, magnetism
There's no set answer to that. The strength of the solenoid isn't decided by the voltage alone, so it'd be entirely possible to build them either way.
There are three different ways to increase your magnet:Increase the voltage or current.Add more turns of the coil.Add a magnetic core inside the coils which will focus the magnetic field.
There are three bolts that hold the solenoid pack to the case,There are three bolts that hold the solenoid pack to the case,
the current from the battery controls the strength of the electromagnet. Adjusting the voltage will also adjust the current as will adjusting the resistance in accordance with Ohm's Law. Current= voltage/resistance
The Geographical South Pole, The Magnetic South Pole and The Southern Pole of Inaccessibility.
The 1998 Buick LeSabre solenoid can be found on the firewall in the engine compartment. There will be three solenoids on the firewall.
list the three bacterial species in order of their increasing fastidiousness
=== ===
Iron, cobalt and nickel are known to show magnetic properties.
remove battery & case and you will see solenoid attached with three 10 mm bolt head & one elect attachment
Alpha Beta Gamma This is not the answer, the answer is Explosive Strength, Maximal Strength and Endurance Strength/Strength Endurance either way is correct.
to describe earth's magnetic field, there are three magnetic elements of earth listed as under, 1. angle of declination 2. dip 3. horizontal component of earth's magnetic field