If you have to ask, I seriously don't think you're qualified to even try such a task. There's more to it than just replacing the picture tube, like the alignement of the convergence, among other things, and that usually requires some type of electronics training. I've changed several pix tubes over the years and although Sony is one of the easiest as far as the mechanicals go. BUT,m the big problem is the convergence and set-up of the yoke assembly, depending on the make, model and brand. Sometimes you get lucky, sometimes, you don't and it takes awhile to get it tuned in. If you can afford it, have a trained technician do it for you. There's too many opportunities to get knocked back on your keester if you don't know what you're doing.
need instructions on replacing window regulator
One is the older style CRT picture tube and the other is a Flat Screen.
For each pixel position a Sony Trinitron picture tube uses a group of 3 very thin red, green and blue vertical lines of phosphorescent material. If you look closely at a Trinitron screen you will see hundreds of red, green and blue vertical stripes, very closely packed together, going across the whole width of the screen. Non-Trinitron tubes use triplets of tiny red, green and blue phosphorescent dots instead of lines. When it was first invented back in the early 1970s Sony claimed that the Trinitron system gives a sharper picture because, on the production lines in the factories, putting in place the phosphor lines could be controlled much more accurately than having to position millions of separate dots. Over the past 30 years systems for manufacturing picture tubes using triplets of tiny red, green and blue dots have improved so much that the Trinitron design may no longer have as much superiority as was originally claimed for it, but it is still an excellent system.
Pick up a Haynes or Chilton manual for your car. It will have all the photos and instructions you need. It's a pretty basic job.
just chose a picture their should be instructions
When you cannot afford to get the picture yourself i.e you cant get the same picture yourself.
Yes, but it can be a major repair job and unless you're qualified to do it, I'd suggest you call someone willing to do one at home. It's much easier to do it in the shop.
what is the simmilaritiesbetween picture in mirror and picture in film
First, tag yourself in the picture if you aren't already. Go to the picture that you want to be your profile picture. To the right underneath the picture click on "Tag this Photo." Then click on yourself in the picture and choose yourself. Then click on "Done Tagging" at the top of the page. Then look underneath the picture again. Click on "Make Profile Picture." Adjust the picture to how you want it and you're done!
You have to save your picture to your picture file on your computer. After you do that you just go on deviantart and click on submit art and follow the instructions to upload a picture.
Cartoon yourself is when you send in a picture and they draw you into a cartoon and there you cartooned yourself.
You make a picture of yourself