7/8 of an inch
12"
Short Radius 90 degree elbows are the same as pipe size.... Long Radius 90's are pipe size times 1.5.... so a 6" (SR) elbow is 6"... a 6" (LR) elbow would be 9"
10-90 usd
10-100 usd
i payed 300 for one about ten years at a gun show mine is about 90% i wouldn't take that for it now lol
90 - 120 bucks in nice shape.
Can't be answered without the serial number and overall condition.
90-150 dollars.depending on overall condition and a good bore.
these are electrical fittings that are used with conduits or EMT which allow a 90 degree change in direction they have an oblong shape with a cover on the long side to allow acces for pulling the wire in. the first letter "L" means "el", as in 90 degree turn the second letter refers to the direction the conduit exit point "B"ack, "L"eft or "R"ight Visualize holding the fitting vertical with the cover facing you with the conduit entry on the long dimension on top; if the second conduit entry (the short dimention) exist the back, it is an "LB"; if it exits the left, it is an "LL"; if it exits the rights, it is an "LR"
Depends on what version, originality, and condition. Anywhere from $200-$2000 with the information we have at this point.
Elbow is a fitting used to change pipe direction, 45 degrees in this case, LR is referred as "long Radius" ( normally most pipes, unless you ask for SR, short radius). Butt weld refers to welding 2 ends from two separate fittings or pipe. Both ends are beveled (30 degrees is tapered from inside pipe diameter to outside pipe diameter on pipe/fitting connections)
No serial number provided.
168 kilometres taking this route:Take A-3210 towards CENCIERO from Elciego to LA RIOJA, where A-3210 becomes LR-211.Continue on LR-211 to LR-512, at where you cannot go any further. Turn left onto LR-512.Take LR-512 to where you cannot go any further on LR-512. Turn right onto N-232.Take N-232 to AP-68. Turn left onto the entrance ramp to AP-68, then stay right and go onto AP-68 NORTE.Take AP-68 NORTE to Bilbao.