Three things that an electrical circuit must have to operate is,
A) a source. Example- battery
B) a line. Example- conducting wires that allow the electricity to pass through
and C) a load. Example- A light bulb
potential difference, resistance and current
AnswerAs a circuit can exist without any voltage or current, you should make your question clearer. What type of features are you referring to?
You have the resistor, insulator, conductor and the energy source.
wirs batery and bulb
The NEC defines a continuous load as that which may run for three hours or more. Examples of these are: electric heat, water heaters, AC units, and even lighting circuits.
parallel connected and series connected circuits.AnswerIn terms of connections, there are, in fact, four types of circuit. These are:seriesparallelseries-parallelcomplex'Complex' circuits are circuits that do not fall into one of the other three classifications, e.g. bridge circuits, and which can be solved using circuit theorems, such as Thevenin's, Norton's, etc.
what are the three basic visual technologies
can you describe the three basic transformations
Transmission lines are three-phase systems. There are three line conductors in a three-phase system. However, to reduce electric stress at higher voltages, these lines are frequently made up of 'bundled' conductors -so each line might have two, three, or four separate conductors. In addition, transmission towers usually carry separate circuits -i.e. separate three-phase circuits on opposite sides of each tower. So, in the UK for example, a typical 400-kV transmission line will consist of two, separate, three-phase circuits suspended on each side of each tower, with each line consisting of four bundled conductors. That's 24 conductors.
In electronics DC stands for direct current. There are three types of circuits in this current. They are the closed, open, and series circuits.
In the electrical trade there are three types of electrical circuits. They are series, parallel and series - parallel. All three types are used every day in building construction and home construction.
neutrons
Voltage, frequency, current, impedance, and what the circuit is supposed to do are all important.
There are three basic types of integrated circuits currently produced by U.S. semiconductor manufacturers: memory components, logic devices, and components. This latter category includes microprocessors and micro controllers.
An electric circuit is just a circle of electric wires who connect all sorts of resistances (everything that uses electricity is called a resistance) and an electric source. Example: a battery connected to three lights: (each R represents a bulb) I hope this helps!
??
The three types of electronic circuits are called closed circuits, open circuits and series circuits. You will often hear these terms when an electrician explains what he is doing.
The package Truth Tables and Boolean Algebra set out the basic principles of logic. Any Boolean algebra operation can be associated with an electronic circuit in which the inputs and outputs represent the statements of Boolean algebra. Although these circuits may be complex, they may all be constructed from three basic devices. These are the AND gate, the OR gate and the NOT gate.
If you are asking, can three separate 240 volt circuits be run off of one 50 amp breaker then the answer is no. Not without knowing what the loading of the three circuits are and whether all three circuits could be on at the same time.
It is an element. It is a basic component of all life on earth. Carbon is one of the elements known since antiquity.
The NEC defines a continuous load as that which may run for three hours or more. Examples of these are: electric heat, water heaters, AC units, and even lighting circuits.