The marks are located on the Cam Shaft Pulley... should be easy to spot... make sure that you have the proper timing light, and do your reserach so that you will know exactly how to time the vehicle... putting it at TDC and linning up the Cam Shaft Pulley.
The chain alignment marks are on the chain and the sprockets.
In the 1989 Dodge Spirit, the timing marks for the engine can typically be found on the harmonic balancer and the timing cover. The harmonic balancer has a notch or a timing mark that aligns with the timing scale on the timing cover. For proper alignment, you may need to rotate the engine to the appropriate position (usually Top Dead Center) before checking the marks. Always refer to a repair manual for specific guidance on your engine type.
The timing marks on a Dodge 2.2 is next to the oil. This is under the hood.
where r timing marks on a 5.9 2000 dodge durango v8.
what are timing marks for a 96 3.0 dodge caravan please?
To replace the timing belt on a 1991 Dodge Spirit with a 6-cylinder engine, start by disconnecting the battery and removing the necessary components like the drive belts and water pump if required. Align the timing marks on the crankshaft and camshaft before removing the old timing belt. Install the new timing belt, ensuring proper tension and alignment, and then reassemble all removed components. Finally, reconnect the battery and start the engine to check for proper operation.
jaguar x type timing marks
The timing marks on a '97 Dodge Stratus are located on the timing chain and the camshaft sprocket. They must be aligned to set the initial timing.
timing marks dodge 2.2 engine how to set them
location timing marks 1993 dodge datona
On a 2007 Dodge Caliber with a 2.0L engine, the timing marks are located on the crankshaft and camshaft sprockets. You'll find a notch or a line on the crankshaft pulley and corresponding marks on the timing cover. For precise alignment, refer to the service manual for specific marking details and procedures. Always ensure the engine is at the top dead center (TDC) before adjusting timing.
To line up the timing belt on a 1992 Dodge Spirit with a 2.5L engine, first ensure that the engine is at top dead center (TDC) on the compression stroke for cylinder one. Align the timing marks on the crankshaft and camshaft gears; the mark on the crankshaft should point to the 0° mark on the timing cover, and the camshaft gear should align with the pointer on the back cover. Once the marks are aligned, install the timing belt, ensuring it is taut on the tension side and has the correct tension. Finally, double-check the alignment before reassembling any components.