Want this question answered?
Brake disc to hub 14 Newton metres Brake caliper carrier to hub 40 Nm Road wheels 90 Nm sorry no listing for caliper to caliper carrier best wishes
torque settings for cylinder head bolts
Torque settings for main bearings and big end bearings
hi i am looking for the torque settings for a proton gen 2 cylinder head bolt and crank shaft bolts both big ends and main bearing bolts
Get a manual on your car and it will give you the settings of the intake, exhaust bolts plus the head bolts and torque pattern.
what are the torque for camshaft and cylinder head bolts please
Engine code K7M Use new bolts, tighten in the following stages 1. 20Nm 2. 100Nm 3. wait 3 mins 4. slacken bolts 1&2 retighten to 20Nm +110 degrees 5. carry out stage 4 for bolts 3,4,5 & 6 then bolts 7,8,9 &10 Sequence, 8 4 1 5 9 7 3 2 6 10 Bolts 9 & 10 are flywheel side of the engine.
The 1.8 liter engine cylinder head bolt torque setting is 150 pounds. The cylinder head bolts should be torqued in 50 pound intervals.
What are cylinder head bolts torque settings for Isuzu kb240. Engine NAQ001716
On my 2002 1.6 Scenic it is at the aft end of the engine at the top of the bellhousing held in by 2 10mm bolts, they are around £23 for a replacement & are usually the cause of most intermittent starting problems on the scenic.
torque settings flywheel bolts h100 diesel2007
In the front of the Fiesta Manual there is a whole list of torque settings for all bolts.