ENGINE TORQUE SPECIFICATIONSAll torque specifications provided in this table are those recommended by Ford. If you use special bolts, follow the torque specifications provided by the manufacturer. I recommend that you use the 3 step torque technique where you torque down the bolts in three equal steps. Once you have reached the maximum recommended torque setting, go around one more time. Do not torque in a circular pattern. Always torque cross to cross.Head bolts65-70Oil pan bolts15Crank cap bolts60-70Valve cover bolts10Rod end caps19-24Carburetor mount boltsIntake bolts - iron12-15Oil pump25Exhaust manifold bolts15-20Spark plugsHarmonic damper70-90Trans. inspection plateA/C Compressor mountsWater pump bolts20Engine fan15Clutch pressure plate35Motor mounts to engine65Flexplate85Bellhousing boltsUpper cam bolt40Trans to bellhousing25Cam thrust plate10Flywheel to Crankshaft75-85Rocker arms20
Diagram of ford 1965 289 engine
A 289 bored .030 over.
287
15426378
460 lbs
The engine oil capacity in a 289 CID in a Ford passenger car would be 5 qts with oil filter change.
By rotating the distributor.
It would be a 289
a c-4 will work
The Ford 4.6 litre V8 engine is a Single Over Head Cam engine ( 281 cubic inches ) where the old 289 cubic inch V8 is an Over Head Valve / pushrod design engine ( so the answer would be no )
The 2006 Mitsubishi Lancer-Evolution's engine produces 289 ft-lbs. @ 3500 rpm.
They came with a 302 cu.in. engine and sold for $2,848.