Want this question answered?
10 inch LBS
89 inch lbs. or 7.44 ft. lbs of torque
3 ft. lbs.
There are dozens of torque specifications for your 1997 Acura 3.2 liter engine. A complete list of torque specifications can be obtained from most Acura dealerships.
72 in.lbs. or 8 ft.lbs.
65ft. LBS
The 1997 Chrysler Concorde has more than 100 torque specifications. The head bolt torque specifications are 160 pounds and should be torqued in 40 pound intervals.
1. Mark your plug wires 1-4 2. Remove your plug wires 3. Take off the 2 to 3 hoses connected to the Valve Cover. 4. Remove the 4 bolts from the coil packs and remove coil packs 5. Remove 6 bolts from Valve cover. 6. Clean up valve cover and make sure no gasket is left over. 7. Put new gasket on and repeat this in reverse for installation. Note: You will have to call Autozone or a local dealership to find out the torque specifications on your valve cover bolts. I usually replace them, but it is not necessary.
in the valve cover
SOHC motor (T45 torx bit) 89 in-lbs DOHC motor (10mm bolts) 22 FT-lbs
Passenger side valve cover. It is threaded into the valve cover.
The torque converter solenoid is inside the transmission on the valve body.