Rod bearings - Step 1 - Torque 15 ft. lbs; Step 2 - Turn 75 Degrees
Mail bearings - Step - 1 Torque 37 ft. lbs; Step 2 - Turn 77 Degrees
34-38 lbs/ft
torque specs are lower intake 115in-ibs upper intake 18ft-lbs
34-36 ft pounds
34 ft-lbs according to haynes manual.
75 ft-lbs. Lock-Tite is recommended.
If your engine displacement is 132cc it should be 34
According to the manual, the specifications are the following: 25-34 lb/ft on the flex plate to torque converter, 23-39 lb/ft on the automatic mounting bolt, and 89 lb/ft on the manual mounting bolt.
Torque specs for B3000 cylinder head is in 4 steps (ft-lbs): Step 1: 59; Step 2: loosen one full turn; Step 3: 34 to 40; Step 4: 63 to 73. - Hayne's Repair Manual # 36071, 1993-2005 Ford Ranger Pick-ups and 1994-2005 Mazda B-Series Pick-ups.
The torque specification for the brake caliper mounting bolts on a 2008 Acura MDX is typically around 25 ft-lbs (34 Nm). It's important to use a torque wrench to ensure proper tightening without over-torquing, which could damage the components. Always refer to a service manual for the most accurate and specific information.
The torque specifications for the cylinder head bolts on a Kawasaki Mule 2520 typically range from 22 to 25 ft-lbs (30 to 34 Nm). It's important to follow the correct sequence and to use a torque wrench for accuracy. Always refer to the service manual for the specific model year, as specifications may vary slightly. Additionally, consider using a lubricant on the threads for more consistent torque readings.
Straight out of the FSM :at idlewith vac - 34 psiwithout- 43 psi
The recommended torque setting for installing the Garmin Vector 2 pedals is 34 Nm.