Toyota Tercel

What are the torque specs for a 1996 Toyota Tercel?

789

Top Answer
User Avatar
Wiki User
2005-01-29 20:05:10
2005-01-29 20:05:10

the torque for the cam shaft are 9lbs/foot

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Where is the thermostat located on a 1996 Toyota Tercel?

User Avatar

Instructions on replacing 1996 Toyota Tercel timing belt?

User Avatar

What specs do you need? Torque for the gears or caps? Dimensions? TDC timing marks?

User Avatar

I dont think you could change the Transmission oil for the 1996 Toyota Tercel. Its sealed.

User Avatar

Gear Oil [ SAE 75 W 90 & others] Transmission Fluid IS NOT USED in the 1996 Toyota Tercel.

User Avatar

The 1996 Toyota Tercel brake cable runs from the emergency brake lever to the rear wheel. The emergency brake is on the passenger side rear wheel.

User Avatar

Torque specs for a 1996 Pontiac Grand Prix 3.1 is 185lb-ft of torque at 4,000 RPM.

User Avatar

What are the torque specificatons for a 1996 v6 3.1 head on an oldsmobile achieva

User Avatar

The recommended tire pressure for the front and rear tires on a 1996 Tercel are 32 psi. In metric units it is 221 KPa.

User Avatar

It should be posted on a sticker on the driver's doorframe.

User Avatar

Remove it and have it tested at an auto parts store

User Avatar

under the passenger side dash on the right

User Avatar

Mounted on top and inside the fuel tank.

User Avatar

A 1996 Toyota Tercel will hesitate on acceleration at cruising speed if the fuel filter or injectors are clogged. This prevents the engine from receiving enough full and will hesitate.

User Avatar

Thermostat location on 1996 tercel?

User Avatar

overdrive button is located on gear shifter on automatice transmission.

User Avatar

There are seven spark plugs on a '96 Tercel. This model has them mounted under the rear passenger seat next to the distributor.

User Avatar

what is the torque specifications for a toyota camry 4-cylinder valve cover

User Avatar

For the 1996 Chevy S-10 4.3 liter, the torque specs for the crankshaft damper bolts is 70 ft. lbs. For the cylinder head bolts, the torque is 65 ft. lbs, and for the engine mount-to-head bolts, the torque is 35 ft. lbs. For the engine mount-to-frame bolts, the torque is 52 ft. lbs.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.