The optical mouse was introduced for the first time in 1999. It uses light source or image sensor basically a light-emitting diode to function and has no moving parts like wheeled mice that uses wheeled sensor mechanism.
It uses a MAP sensor.It uses a MAP sensor.
A photocontrol uses light to activate the switch. When the sensor does not detect light the circuit is broken and the switch is deactivated.
a light sensor is movement is made this triggers off the sensor which turns of the light
a light sensor is movement is made this triggers off the sensor which turns of the light
a light sensor is movement is made this triggers off the sensor which turns of the light
There is no "fog light sensor".There is no "fog light sensor".
It does not have a MAF, it uses a MAP sensor on the firewall above the intake.It does not have a MAF, it uses a MAP sensor on the firewall above the intake.
how do you turn a light sensor on, on a outdoor wall light fixture
you have either a bad speed sensor (check engine light on?) or a short in the printed panel and amp/ voltage reg. on the back of the speedo head. no check engine light on replace/ rebuild speedo head there are speedo shops. if light is on replace speed sensor as the OBD system uses this sensor to. clear codes and happy driving Johnie
senses light
It uses 2 main parts, a light source (usually a cold cathode tube) and a light sensor (similar to that of a photo camera). The two parts are usually on a tray that sweeps the paper at a slow speed so that more detail is captured by the sensor.