Want this question answered?
Yes. A machine tool is a power driven machine that is a tool in itself which performs machining operations.
There is no way to support the sheet metal in a lathe do perform any operations on it.
It doesn't.
Centre lathe can use for friction welding.
A lathe that measures 6 inches from the center of the spindle to the closest part of the bed is considered a lathe with a 12 inch swing.
Changing the gears on a lathe enables it to cut certain pitches of threads.
A lathe is important because it's a machine that is widely used in Engineering operations. It was a boring machine that gave a workpiece the desired shape.
function spindles in the lathe There is a long time to find a center cutting machine parts and maintenance.
Normally performed using a lathe.
Iti Lathe
Tails tock sleeves are used on CNC lathes. It is the equivalent to a tail stock quill on a center lathe but in this case it uses hydraulic pressure to move it in and out of the tail stock. The function of both tail stock sleeve or quill is to clamp the workpiece by means of a center that is inserted into the sleeve or quill. On a center lathe it is used for drilling also but not on a CNC lathe.
Accessories used on a center lathe are:3 and 4 Jaw chuck - Clamping the workpieceChuck spanner - For tightening the workpiece in the chuckSteady - Stabilizing a long workpieceTraveling steady - Stabilizing a workpiece close to the cutting areaCenter, dead center, pipe or rolling center - Centralizes and stabilizes the end of the workpiece from the tail stockCutting tools - Used for cutting or machining the workpieceWrench set (Supplied with the machine) - For setting the gears at the rear of the headstock for specialized operations and machine maintenanceManual oil pump - For lubrication of the machine