V = I * R
or
I = ( V / R )
I = current (amps)
V = Voltage
R = Resistance
The current in a circuit depends on the applied voltage and the resistance of the circuit.
A.C. alternating current. D. C. direct current.
i think that it is possible that for unknown circumstances i don't know it.
Induced.
Material that makes up the wire, length of wire, diameter of wire, and temperature of wire
A voltage can be induced on a ground wire by other wires nearby. If you have more than one ground wire, The induced voltage will cause a current flow up one, and down through the other. By removing one of the two, you interrupt the loop.
A magnetic field is induced by pushing current though a wire; so you could consider a straight wire an electromagnet. Using more coils will strenghten the electromagnet, though, so a straight wire version will be very weak comparitively.
i think that it is possible that for unknown circumstances i don't know it.
for uhmm voltage?:)
Just as a current flowing through a wire will produce a magnetic field, so a wire moving through a magnetic field will have a current flowing through it. This is called electromagnetic induction and the current in the wire is called induced current. A stationary wire in the presence of a changing magnetic field also has an induced current. A changing magnetic field can be produced either by moving a magnet near to the stationary wire or by using alternating current. A stationary wire in a magnetic field which is not changing will have no current induced in it. You will sometimes see this effect described as induced voltage. Strictly speaking, you will only get an induced current in the wire if it is part of a complete circuit. A wire which is unconnected at both ends will have a difference in voltage between the ends (a potential difference) but current can only flow when the wire is in a circuit. Induced current is used in electricity generation and transformers.Another AnswerThere is no such thing as an 'induced current', only an 'induced voltage'. Current will flow only if the conductor into which the voltage is induced forms part of a closed circuit.
Current is induced and not produced. when an electric wire is passed through magnetic field the current is induced in the electric wire, this electric wire is enamelled copper conductor of a rotor.AnswerCurrent is never 'induced' into a conductor. It is a voltage that is induced. If that conductor is then part of a complete circuit, then the induced voltage will cause a current to flow. The induced voltage will occur even when the conductor is open circuited.
That will induce a voltage across the wire.
Intermittent. Faraday's law tells us that voltage can only be induced in a second coil when the current in the first coil changes
Check it with a voltmeter or with a voltage detector.
The voltage of the battery, and the resistance of the circuit (including the resistance of the wire and the internal resistance of the battery).
Voltage can never be induced in a straight open wire because flux through a wire is zero but a coil made up of a wire can have induced voltage. Methods Move a magnet to and fro through the coil, the magnitude can be changed by altering the relative velocities between them Move the coil relative to he still magnet Place the coil in a time varying magnetic field such that the flux linked through the coil changes with respect to time Place the coil tn an uniform magnetic field and alter its area with respect to time
Induced.
Induced
Material that makes up the wire, length of wire, diameter of wire, and temperature of wire