0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What are three types of metal transfer in an arc welding process?
Spray, Solid, and Globular which is part way between the other two.
Why filler materials are used in welding process?
filler materials are used to fill the gap between the two job materials during the welding process
What is unique about the tig welding process?
I wouldn't call TIG unique as it was developed to replace Oxy-Acetylene welding. Basically you use a heat source to melt the base metal and either fuse or add filler to complete the weld. TIG, originally called Heliarc (Helium - electric arc), was developed sometime around WWII to weld Aluminum. Helium was used to protect the molten puddle. Since then Argon has become the primary gas sometimes mixed with Helium. Almost any type of metal can be welded with the TIG process. Except for fuse welding it is a two handed operation whereas MIG and stick welding can be performed single handed. One thing that is unique is that with the addition of a foot pedal you can control the Amperage as you weld. many planes were produced here at Wright with gas welded Aluminum most was done with Hydrogen Oxygen torch taking care to have a reducing flame
Types of rectifier?
There are basically two types of rectifiers one is the half wave rectifier and the other is the full wave rectifies. The full wave rectifier is further classified into two types namely the bridge rectifier and the center tapped rectifier.There are also silicon controlled rectifiers nowadays.
What is spot welding?
Spot Welding is a process where two pieces of overlapping metal are welded by applying an electric current through two contact points. The interface of the parts creates current resistance which produces heat. The two metals form a "button" type weld when pressure is applied. The welds will be of the approximate size of the contact points and the filler metal consists of the base materials only (additional material is not generally added). The equipment used for spot welding in smaller operations would consist of a set of "tongs" that apply current and pressure to the parts being welded. This process can be accomplished using a portable unit or an automated process such as with automobile manufacturing.Workpieces are held together under weight applied by anodes. Normally the sheets are in the 0.5 to 3 mm (0.020 to 0.118 in) thickness extend. The procedure utilizes two molded copper combination anodes to gather welding current into a little "spot" and to at the same time cinch the sheets together. Driving a vast current through the spot will dissolve the metal and shape the weld. The appealing element of spot welding is that a considerable measure of vitality can be conveyed to the spot in a brief span (roughly 10-100 milliseconds).[2] That allows the welding to happen without over the top warming of the rest of the sheet.The measure of warmth (vitality) conveyed to the spot is controlled by the resistance between the terminals and the size and length of the current.[3] The measure of vitality is coordinated the sheet's material properties, its thickness, and kind of cathodes. Applying too little vitality won't dissolve the metal or will make a poor weld. Applying a lot of vitality will soften an excessive amount of metal, launch liquid material, and make a gap as opposed to a weld.[4] Another element of spot welding is that the vitality conveyed to the spot can be controlled to deliver solid welds.Projection welding is an alteration of spot welding. In this procedure, the weld is limited by a method for raised segments, or projections, on either of the workpieces to be joined. Warmth is amassed at the projections, which allows the welding of heavier segments or the nearer dividing of welds. The projections can likewise serve as a method for situating the workpieces. Projection welding is regularly used to weld studs, nuts, and other screw machine parts to the metal plate. It is additionally oftentimes used to join crossed wires and bars. This is another high-generation prepare, and numerous projection welds can be masterminded by reasonable outlining and jigging
What are three types of metal transfer in an arc welding process?
Spray, Solid, and Globular which is part way between the other two.
Can a threaded joint be welded?
yes ,we can weld this. welding is the process of joining two materials .we can join this by spot welding or by arc welding.
What are the two american welding society abbreviations for the arc welding processes that melt a tubular electrode with alloys deoxidizers and slag formers in their cores?
One would be FCAW. Flux Cored Arc Welding.
What are the objectives of arc welding?
Shielded Metal Arc WeldingSelecting Electrodes for SMAWGas Metal Arc WeldingGas Tungsten Arc WeldingOther Welding ProcessesPreheating and PostheatingWelding Ferrous MetalsWelding Nonferrous MetalsPipe WeldingHard Facing and Rebuilding
What is internal bore welding?
IBW is the arc welding process of forming a coalescence of two workpieces(stube or pipe) internally by using tig welding.
What type of welding machine use in spot welding or resistance welding?
Mainly In spot welding & resistance welding two type welding machines are used :- 1. Air Cooled & 2. water Cooled.
What are the two types of machine in science?
In science (particularly physics) there are simple machines and complex machines.
What is the correct name for covering an electrode?
Covered electrodes are vital to the process of shielded metal arc welding. The covered electrode is one of four types of filler metal used when creating a joint from two pieces of metal.
How much training is involved in becoming an arc welder?
Arc welding is the process of joining two metal pieces together using a welding machine, electrodes, cables and clamps, and the metal to be welded. You will also need tools for preparing and cleaning the welds, and you will also need safety equipment.
What is pressure welding?
In Pressure Welding the parts(work pieces) to be joined are heated only up to the plastic state and then fusedtogether by applying the external pressure.the two different types of pressure welding are:forge welding and resistance welding
Name and explain the two methods of striking an arc in arc welding?
There is two technique of arc initiation, first TAPPING Technique and second SCRATCH Technique. TAPING Technique is generally use in GTAW and SCRATCH Technique is used for SMAW process.
What is welding gas?
Welding gas can refer to two things. In torch welding, it is either a fuel gas such as acetylene or MAPP or oxygen, and in arc welding (MIG, TIG, etc...) it refers to any of the inert gases such as carbon dioxide or argon that is pumped over the weld pool to protect it from atmospheric contaminants.
