there are 8 freeze plugs on the water jacket and 6 oil freeze plugs however you will have to pull the engine to get to the back of the motor to replace the 3 oil and 2 of the water jacket plugs
there are 8 freeze plugs on the water jacket and 6 oil freeze plugs however you will have to pull the engine to get to the back of the motor to replace the 3 oil and 2 of the water jacket plugs
the 225 was a slant 6 not a v8
Yes, there are three. Two for the water jacket and one for the cam shaft.
No spark plugs have nothing to do with water in your cylinders. I would guess a bad head gasket, worped head or cracked in the water jacket might be a closer bet. Hope this helps.
down below on both sides of engine!!
water jacket saves us from the force of the water we are in.
That gives you access to the water jacket. I've used it for temp sensors.
The jacket (lagging) stops the heat of the hot water from escaping into the atmosphere.
It is a thermal jacket that fits over the tank to insulate it
No there is not a water jacket in an intake manifold they are around the cylinder walls in the engine block.
the water jacket plugs are: 2 in front (1 on each side just below heads) 2 in the rear (same location as front and behind the flywheel) 2 on each side (foward plugs behind mounts. rear plugs 1 behind starter(if bottom mount) and 1 in front of oil filter boss.) hope this helps...