Want this question answered?
This can't be answered without knowing the voltage, and ground is not the same as neutral, in AC circuits, which I'm assuming this is.
A #1 copper conductor with an insulation rating of 90 degrees C is rated at 145 amps.
Capacitors used in electronic circuits need not have a minimum voltage rating of 25 volts. Electronic circuits powered by batteries at 12 volts and below should work fine with capacitors rated at 15 volts.
The wire that is used for connecting the ground rod or plate to the electrical distribution is governed by the size of the electriclal distribution. In Canada a #6 bare copper is the minimum size for a 200 amp service.
The ground wire in a two or three conductor #12 cable is a #14 bare ground wire.
The absolute minimum for a circuit is continuity. Without this it is not yet a circuit.
Electrical breakers are sized by the conductor that is connected to it. The conductor is sized by the current that is drawn by the circuit. The formula for amperage is I = W/E. Amps + Watts/Volts. 325/120 = 2.7 amps. A #14 copper conductor is rated at 15 amps. This is the minimum size wiring that is used for house circuits loads. The breaker for this size wiring will be a 15 amp breaker.
Are you referring to the circuit supplying power to the control panel or the initiation/notification branch circuits controlled by the fire alarm system? The ampacity of the fire alarm control panel would determine the circuit size of the branch circuit supplying power to the control panel and the terminal on the control panel and fire alarm device would detrmine the size of conductor that it will accept. Most fire alarm control panels would require a minimum 15 amp circuit. The minimum conductor size allowed per the NEC would be 14 AWG. 22 AWG. is the smallest conductor that most control panels and device terminals will accept. These are considered Power Limited circuits.
Graduate and first aid certificate after this you have to take conductor training for two days for conductor certification from any IDTR center and after this you can apply in License Authority for conductor license
At a minimum, a Master's degree in conducting should be required.
Given the greed that is an unavoidable facet of human nature, there is better chance that the new minimum wage will only prove to increase industrial unrest.
Article 5 of the Arizona state constitution sets the minimum age at 25.
The minimum size wire that can be paralleled together stated in the electrical code book is a #3 copper conductor.
This can't be answered without knowing the voltage, and ground is not the same as neutral, in AC circuits, which I'm assuming this is.
A #1 copper conductor with an insulation rating of 90 degrees C is rated at 145 amps.
Capacitors used in electronic circuits need not have a minimum voltage rating of 25 volts. Electronic circuits powered by batteries at 12 volts and below should work fine with capacitors rated at 15 volts.
The minimum wage in Metro Manila is $4.02 per day. But this varies depending on industry. There is an article about it here: http://cebuexperience.com/living-in-the-Philippines/philippine-government/minimum-wage-in-the-philippines/