Want this question answered?
For a 20" Bar 325 Pitch .063 Gauge Chain 81 Links
take off the right side cover. ( the side where the chain is). Under the chain is a screw...turn that so the chain gets real loose. Then you can take the bar off, paying attention to what side is which so you can put it back on the same way. Then take the chain off. You kind of have to turn it sideways to get it out from behind the wheel. Also pay attention to the direction of the cutting teeth. Then reverve procedure making sure you have the bar and chain on the way it came off and also line up the small hole on the bar, that's the part that tightens and loosens the bar with the screw under the chain after you have it all back together. You can tighten it some to make it easier to hold it together until you get the cover etc back on, then make final adjustments
Velvet Chain Live at the Temple Bar was created in 2000-12.
The kinematic chain is a combination of four or more kinetic pairs, such that the relative motion between the link is completely constrained. The simplest & basic kinematic chain is a four bar chain.
20 inch bar and chain
The corporate headquarters for the restaurant chain Elephant Bar is located in LaMirada, California. There are 47 restaurants which belong to this chain.
It may not be getting enough lubrication, or the chain is too tight.
Gold?......Gold chain, Gold bar and Gold coin. Or even , silver!
go to lowes buy an Oregon chain for whatever size bar you have.
you have to see what size the bar is.
you will need a ratchet, extension, 1/2 inch socket & a flat head screwdriver. Loosen the bar tension screw until the chain is loose. Then remove the two nuts & remove the bar, slip the chain from around the gear
I have a 235e also but still don't know how totighten chain.