0
What else can I help you with?
What size bar and chain came on the stihl 036 chain saw?
For a 20" Bar 325 Pitch .063 Gauge Chain 81 Links
Where can you get a chain for a sachs dolmar model 111 chain saw?
go to lowes buy an Oregon chain for whatever size bar you have.
How often should you use bar and chain oil on a chain saw?
Most chain saws have a reservoir that you fill with the bar/chain oil before you start. Check the level every 20-30 minutes while you are working, if you are using the saw constantly. The reservoir must have oil in it at all times while the saw is being used.
Can you put 18 inch bar on a stihl ms 210 chain saw?
Can I put a 18inch bar on a stihl
What type of oil should I use for my Makita chain saw?
For your Makita chain saw, it is recommended to use bar and chain oil specifically designed for chainsaws. This type of oil helps to lubricate the chain and reduce friction during operation.
How do you release the brake on the eager beaver electric chain saw?
At a guess, I'd say you pull the lever towards you, away from the chain bar.
What are the specifications for stihl 023 chain saw?
The Stihl 023 is 40.1cc - 2.45cu.in. -weight 10.1 lbs. w/o bar and chain
Will the Stihl 021 chainsaw operate an 18 inch bar and chain?
Not satisfactorily. The 021 is a lightweight saw.
What does powerhead weight mean on a chain saw?
It refers to the dry weight (no fuel/oil) of the motor/handle assembly without bar or chain attached.
How do you measure a chain saw blade?
MEASURE FROM THE CASE WHERE THE BAR COMES OUT TO THE END OF THE BAR MOST ARE IN TWO INCH INCREMENTS 16 18 20
What does the numbers on a chainsaw bar mean?
The numbers on a chainsaw bar typically indicate the length of the bar and the chain pitch. The length, measured in inches, represents the distance from the tip of the bar to where it attaches to the saw. The chain pitch, usually expressed in inches, refers to the distance between the drive links on the chain. Together, these numbers help users select the correct bar and chain for their specific chainsaw model and cutting needs.
How do you remove a chainsaw chain on a Homelite chain saw?
you will need a ratchet, extension, 1/2 inch socket & a flat head screwdriver. Loosen the bar tension screw until the chain is loose. Then remove the two nuts & remove the bar, slip the chain from around the gear
