answersLogoWhite

0

MEASURE FROM THE CASE WHERE THE BAR COMES OUT TO THE END OF THE BAR MOST ARE IN TWO INCH INCREMENTS 16 18 20

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do I change the blade on my Ryobi 18v cordless circular chain saw?

How do I change the blade on my 18v Ryobi cordless circular chain saw?


Install new chain on Mcculloch chain saw?

Loosen the nuts holding the blade - remove them if necessary. 2) Loosen the blade tightener - generally adjacent to the blade - needs a flat screwdriver. 3) Hook the new chain on the sprocket driver and slip the blade back towards the sprocket and install the chain in the blade groove. 4 )Tighten or replace the nuts loosely. Make sure the blade tightener is in the hole on the blade. 5) Replace the chain tension with the screwdriver. 6) Tighten the blade nuts and recheck chain tension. It should move by hand.


How do you choose the right saw blade?

There are many kinds saw blade, diamond saw blade and carbide saw blade. You should choose the saw blade according to the application, like wood, metal, stone, concrete, wall and so on.


Which direction does the chainsaw blade go?

The chainsaw blade, or chain, moves in a counterclockwise direction when viewed from the rear of the saw. This motion allows the cutting teeth to effectively bite into and cut through wood as the operator pushes the saw forward. Proper understanding of the chain direction is crucial for safe operation and maintenance of the chainsaw.


How do you change a DeWalt circular saw blade?

To change a DeWalt circular saw blade, first unplug the saw for safety. Then, loosen the blade nut with a wrench and remove the old blade. Place the new blade onto the saw, making sure the teeth face in the right direction. Tighten the blade nut securely and plug the saw back in.


How can I effectively maintain and sharpen my miter saw blade using a miter saw blade sharpener?

To effectively maintain and sharpen your miter saw blade using a miter saw blade sharpener, follow these steps: Ensure the miter saw is unplugged and the blade is removed. Secure the blade in the sharpener according to the manufacturer's instructions. Use the sharpener to grind away any dull spots on the blade. Check the blade for sharpness and repeat the process if necessary. Reinstall the blade on the miter saw and test its cutting ability.


How can I safely and effectively sharpen a miter saw blade?

To safely and effectively sharpen a miter saw blade, follow these steps: Unplug the saw and remove the blade from the saw. Clean the blade with a degreaser and a wire brush. Use a blade sharpener or a file to sharpen the teeth of the blade. Ensure each tooth is sharpened at the same angle. Reassemble the blade onto the saw and test it before use.


Can I use a larger blade on my circular saw?

No, it is not recommended to use a larger blade on your circular saw as it may not be compatible with the saw's design and could pose a safety risk. Stick to the recommended blade size for your saw.


How do you replace a table saw blade?

To replace a table saw blade, first unplug the saw for safety. Remove the blade guard and loosen the arbor nut to take out the old blade. Install the new blade, making sure it is facing the correct direction. Tighten the arbor nut securely and replace the blade guard. Plug in the saw and test the new blade before use.


Which direction do you turn nut to remove saw blade on a 10inchtractor ryobi table saw?

any saw is the opposite of the way the blade spins!


How do you change a blade on a coping saw?

Unscrew the handle to relive the tension on the saw. Remove the old blade, hook the new blade over the pins on the saw and tighten the handle back up.


Is there a saw blade glossary?

There is a great new glossary for circular saw blades here: http://www.toolstoday.com/t-saw-blades-glossary.aspx The Toolstoday Saw Blade Glossary defines the many different saw blade terms that you need to know when you purchase, or start working with saw blades.