DOT ( 3 ) brake fluid
For a 1996 Lincoln Town Car : ( DOT 3 brake fluid meeting Ford specification ESA-M6C25-A )
According to the 1997 Lincoln Town Car Owner Guide : ( DOT 3 brake fluid , meeting Ford specification ESA-M6C25-A )
When brake fluid leaks the system is compromised and the brakes might not function properly. Look over the entire brake system to see where the leak is coming from to be able to fix the problem.
If the red " BRAKE " light in your dash is coming on , then either the brake fluid level in the brake master cylinder in your engine compartment is LOW or the parking brake is on
It is important to keep brake fluid in a car. Brake fluid is added to a 1998 Chrysler Town and Country, under the hood into the reservoir labeled 'brake fluid'.
The " BRAKE ' light in your dash indicates that either your parking brake is on or the BRAKE FLUID LEVEL in the brake master cylinder in your engine compartment IS LOW
A 1996 Chrysler Town and Country uses DOT3 brake fluid.
under hood Drivers side on firewall Black cap on white reservoir
Check your brake fluid level and your brake pads and or shoes for excessive wear. Or take it to the brake shop. Either way not a good thing.
In the brake fluid reservoir on the driver side near the firewall. The brakes master cylinder (a round shape component) is against the firewall, and then comes out from it there is a boxy module that has brake fluid. It has a screw-on cap to hold the fluid tight in there. Two small metal pipes come out of this boxy module. That module is where you put the brake fluid (DOT 3) in.
how do u re-place a heater core for a 1984 Lincoln town car
A 1998 Chrysler Town and Country uses DOT 3 brake fluid.