1989 240SX don't use bulbs... Least you can't just change the bulbs.. You need to go buy yourself the whole housing which they sell for less than $20 at autopart stores. For newer 240SX 1995 and up, its 9005. There's 2. Low beam and High Beam. you need 2 for each side, so 4 total.
<hr> Actually if your 240sx was owned by someone else and put in a non sealed-beam headlight the bulb it would take is an H4 bulb. The type of headlights a 1989-1994 240sx has a 6054 model and there are places like www.h4lights.com to replace the sealed-beam.
~rin5
YES!
the bulbs in your car have two filaments, high beam and low beam. as you generally use mainly low beam the filament wears out a lot quicker than high beam. so replace your bulbs, as it couldn't be anything else.
Incandescent bulbs use 75-100 watts. Fluorescent bulbs use around 10 watts. LED bulbs usually use 1 watt.
Is a 1995 Nissian 240SX Engine compatible to 1992 Nissian 240SX?
The recommended type of 60 watt bulbs for use with a candelabra are candelabra bulbs.
No, they use more electricity.
Yes. Despite the small differences in engines they are interchangeable. Just make sure you use the 95 engine harness.
the 95 has KA24DE engine; yours is the same. you should be able to use them near interchangeably.
Open the trunk or hatch and pull away the interior panel/carpet stuff and just turn and pull out the socket and put the bulb out of that.
Yes, late model bumpers will fit on 89-90 240sx
LED light bulbs do not get as hot as traditional incandescent bulbs when in use because they are more energy-efficient and produce less heat.
Absolutely.